CONQUEROR PASTURE HERBICIDE 20LT (EQ: GRAZON) NUFARM 0936-20L
- Active ingredient
- Triclopyr 300 g/L + Picloram 100 g/L
- Controls
- Host: Pastures and rangeland. Target: Woody weeds and broadleaf weeds
- Withholding period
- Not required when used as directed (observe label plant-back periods). — always confirm on the registered label
For the control of environmental and noxious woody and herbaceous weeds.
Weeds need to be actively growing for herbicides to have optimum effect.
Delay treatment until all regrowth has had time to grow approximately 1 metre in situations which have been bulldozed, slashed, burnt, ploughed or areas having a previous chemical treatment.
Active ingredients:
Triclopyr(300g/L)
Picloram(100g/L)
Active Ingredient: Triclopyr 300 g/L + Picloram 100 g/L
Chemical Schedule: S6
APVMA Reg. No: 57783
Not required when used as directed (observe label plant-back periods).
Always read the current registered product label before use. Withholding periods must be observed before slaughter, milking, or egg collection. The label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.
Nufarm Conqueror (300 g/L triclopyr + 100 g/L picloram, Group 4) is applied as a foliar or basal spray to actively growing woody and herbaceous weeds in pastures, agricultural non-crop areas, rights-of-way, forests and fallows. Rates are weed- and method-specific on the registered label: high-volume hand gun/knapsack spraying 200–750 mL per 100 L of water applied to thoroughly wet all foliage; boom spraying 2–5 L/ha; aerial (helicopter) 1.5–10 L/ha; gas-powered gun 335–500 mL per 10 L. Spray when weeds are actively growing and, after slashing, burning or dozing, allow regrowth to reach about 1 metre before treating. Withholding period: not required when used as directed. Observe the label plant-back periods for following crops (e.g. 2–9 months on black cracking clay soils). Refer to the registered label for the rate for each weed and application method.
Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.
Always read the label and follow directions for use. The registered label is the legal document governing use of this product.
Download the Safety Data Sheet for this product:
Download SDS (PDF)Required for safe handling and storage. Keep on-site per WHS regulations.
Common Questions
What weeds does Conqueror Pasture Herbicide control?
Conqueror is registered for the control of environmental and noxious woody and herbaceous weeds. For a complete list of target weeds and any use restrictions, please refer to the product label or contact TGRM on (07) 5482 1692.
When is the best time to apply this herbicide?
Weeds need to be actively growing for herbicides to have optimum effect. If the area has been recently bulldozed, slashed, burnt, ploughed, or treated with chemicals, it's best to delay treatment until all regrowth has had time to establish — typically around 1 metre of growth. Always read the product label for full timing guidance.
What are the active ingredients?
Conqueror Pasture Herbicide contains Triclopyr and Picloram. For detailed information about how these work and safety considerations, please read the product label or Safety Data Sheet.
How do I know the correct rate and how to apply it?
All application rates, mixing instructions, and safety directions are detailed on the registered product label. It's essential to read and follow the label completely before use. If you have questions about application, contact TGRM on (07) 5482 1692 or visit us at 55 Tozer St, Gympie — our team or a qualified agronomist can advise you.
Where can I find the Safety Data Sheet and label?
The Safety Data Sheet (SDS) and product label are available from TGRM — please call (07) 5482 1692 or visit 55 Tozer St, Gympie. Always read the label and SDS before handling or applying any chemical product.
Do you ship this product Australia-wide?
As a regulated chemical, this product can only be transported by road freight, it cannot be sent via Australia Post or air freight. Call us on (07) 5482 1692 before ordering to confirm delivery to your area.
Mainland Australia only — we cannot deliver this product to Tasmania. It is classified as environmentally hazardous (harmful to aquatic life), which means it cannot be carried by sea or air freight. Tasmania and other offshore destinations can only be reached by a sea or air leg, so we are unable to send it there. It travels by road freight to mainland addresses as normal. Call us on (07) 5482 1692 if you are unsure about your address.
Can you deliver this to Tasmania?
No. This product is environmentally hazardous (harmful to aquatic life) and cannot legally be carried on sea or air freight. Because every route to Tasmania involves a sea or air crossing, we can only deliver it within mainland Australia. If you are in Tasmania, please call us on (07) 5482 1692 and we will help you find an alternative product.
Can I Click & Collect from Gympie?
Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.