Surefire Mosquito & Midge Slayer Insecticide 1L

Adult mosquitoes and midges. Situation: external area & surrounds of domestic, commercial, public & industrial buildings and structures (APVMA 67430).

Restraints: DO NOT use this product at less than label rates. DO NOT use in situation where predatory mites are established and providing effective mite control. DO NOT apply to mud, sand mangrove or aquatic habitat. DO NOT apply as an Ultra Low Volume (ULV) or via thermal fogging equipment. Mosquitoes and midges - external area & surrounds of domestic, commercial, public & industrial buildings and structures: 50-100 mL/10 L. Mixing: Add the required quantity to water in the spray tank and mix thoroughly. Maintain agitation during both mixing and application. To control mosquitoes apply prepared solution to surfaces where insects rest or harbour. Reapply as necessary. On non-porous surfaces apply as a coarse spray at the rate of 1 L solution per 20 m². When treating non-porous surfaces do not exceed the point of run-off. On porous surfaces or use through power equipment, spray at the rate of 1 L of solution per 10 m². When treating porous surfaces do not exceed the point of run-off. Use the higher rate in situations where pest pressure is high, when rapid knockdown and/or maximum residual protection is desired. The lower rate may be used for follow-up treatments. Residual Surface Treatments: Apply prepared solution to indoor and outdoor surfaces where insects rest or harbour. Internal harbourage sites include (but are not restricted to) areas such as walls, fly screens, behind and under sinks, under furniture and indoor plants. External harbourage sites include (but are not restricted to) areas such as building exteriors, eaves, walls, fences, also garages, sheds, gazebos, ornamental plants, bushes, shrubs, hedges, shady or damp areas around buildings. Reapply as necessary. When applying to vegetation, ensure that spray penetrates entire plant or hedge and covers both leaf surfaces. Perimeter treatments: Apply the prepared solution to a band of soil or vegetation two to three metres wide around and adjacent to the structure. Also treat the foundation of the structure to a height of approximately one metre. Use a spray volume of 5 to 10 L per 100 m². Higher volumes of water may be needed if organic matter is present or foliage is dense. Precautions: DO NOT spray into the air or directly on humans, pets or animals. Avoid contact with food, food utensils or preparation surfaces. Before spraying, remove animals and pets from the areas to be treated. Cover or remove any open food and water containers. Cover or remove fish ponds, aquariums etc before spraying. Re-entry: DO NOT allow people and pets to enter treated areas until the spray has dried (normally 3-4 hours) and ventilate buildings before reoccupying. When prior entry is necessary, wear cotton overalls buttoned to the neck, wrist and elbow-length PVC, neoprene or nitrile gloves and chemical resistant footwear. Clothing must be laundered after each day's use. Environment: Dangerous to fish and aquatic organisms. DO NOT contaminate dams, rivers, streams or waterways or drains with product or used containers. Safety directions: Poisonous if swallowed. May irritate eyes and skin. Repeated exposure may cause allergic disorders. Avoid contact with eyes and skin. When opening the container and preparing spray, wear cotton overalls buttoned to the neck and wrist, washable hat and elbow length PVC or nitrile gloves. When using prepared spray wear protective waterproof clothing, elbow length PVC or nitrile gloves and water resistant footwear. After each day's use, wash gloves and contaminated clothing. Wash hands after use. First aid: If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia 13 11 26. Storage: Store in the closed, original container in a cool, well ventilated area away from children, animals, food and feedstuffs. Do not store for prolonged periods in direct sunlight. Always read the registered label before use (APVMA 67430).

Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Download Product Label (PDF)

View APVMA Registration

Always read the label and follow directions for use. The registered label is the legal document governing use of this product.

Download the Safety Data Sheet for this product:

Download SDS (PDF)

Required for safe handling and storage. Keep on-site per WHS regulations.