TWIN TUBE 7 X 3.5MM X 30M DAVIESWAY 0779/1

Install the twin tube into your milking system by connecting the inlet end to the vacuum line and the outlet end to the milk receiver or releaser unit, ensuring all connections are secure and airtight. Run the system at normal operating vacuum (typically 50kPa) and check for any leaks or blockages before commencing milking. Replace the tubing immediately if any cracks, discoloration, or loss of elasticity is observed. After each milking, flush the system thoroughly with clean water and disconnect the tubing for cleaning. Tips: Store the tubing in a cool, dark location away from direct sunlight and chemicals, as UV exposure and oils can degrade silicone and rubber materials. Always use food-grade cleaning solutions and inspect tubing regularly for wear; proper care extends the lifespan significantly. Ensure the tubing diameter matches your system specifications—incorrect sizing reduces efficiency and can stress teat tissue. Disclaimer: The information provided above is sourced from reputable industry references including Dairy Australia, FutureBeef, MLA, Business Queensland, GRDC and other recognised Australian agricultural authorities. It is intended as a general guide only. Results vary depending on your specific situation, animal class, soil type, climate and management practices. Tom Grady Rural Merchandise recommends consulting with your veterinarian, agronomist or relevant specialist before making product or management decisions for your property. Contact our team on (07) 5482 1692 — we're happy to help.