STRAINER POST FITTING KIT ONLY 100NB X 40NB ROTECH SSFK10040
About the Rotech Fitting kit:
Are you looking for a long lasting rust resistant fence straining kit that can take less than 15 minutes to set up! These fitting kits are simple and very easy to install.
Everything is bolt on. No need to carry around your welder or drill. All you need is something to tighten the nuts and bolts.
The design of the Twist Tight Stay Connectors means you can run your end assemble at any angle or pair it with corner kit.
The unique design incorporates a cable instead of a tension rod. It is a lot quicker to install – just drop the loop over your post, or slip knot it if you have existing wire installed and run the tension cable to your footplate. No drilling required.
All components are either stainless steel or hot dipped galvanised to ensure a long lasting end assembly.
In each fitting kit you will get the following:
A Twist Tight Stay Connector:
These are made from hot dipped galvanised steel.
A Footplate:
These footplates are made from hot dipped galvanised steel, which means it will last longer than other alternatives.
The tongue on the metal plate that goes into your stay is welded on.
As a result this footplate is more durable, more secure and stronger than other footplates on the market.
One Tension Assembly:
This includes a cable made from stainless steel and a hot dipped galvanised steel eye bolt.
The cable is already connected to the eye bolt and the loop is already set up.
No need for rope grips, saving you time.
A Post Cap:
All post caps are made using the Galvabond Process.
And if you buy a set of five fitting kits, they come in a convenient red box.
Everything is stored in a compact box for easy storage and portability. Just grab the box, chuck it on the back of your ute and you’re ready to go!
Read our full fence post spacing guide →
Common Questions
How long does it take to set up?
Less than 15 minutes. The kit is designed to be simple and easy to install with bolt-on components — no welding or drilling needed.
What tools do I need to install it?
Just something to tighten the nuts and bolts. No welding, drilling, or special equipment required.
Will it rust?
No. All components are either stainless steel or hot dipped galvanised, so the kit is rust resistant and built to last.
What's included in the kit?
You get a Twist Tight Stay Connector (hot dipped galvanised), a footplate (hot dipped galvanised with welded tongue for strength), one tension assembly with stainless steel cable & eye bolt (loop already set up), and a post cap (Galvabond Process). No rope grips needed.
Can I run the end assembly at different angles?
Yes. The Twist Tight Stay Connector design lets you run your end assembly at any angle, and you can pair it with a corner kit if needed.
Do you ship this product Australia-wide?
Yes, this product ships Australia-wide via road courier. It is too large or heavy for Australia Post. Call us on (07) 5482 1692 if you have any questions about delivery to your area.
Can I Click & Collect from Gympie?
Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.
