OCP Slasher Organic Weedkiller Concentrate 5L Herbicide

NOT REQUIRED WHEN USED AS DIRECTED.

Always read the current registered product label before use. Withholding periods must be observed before slaughter, milking, or egg collection. The label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Paths, driveways, gardens, around sheds and buildings, amenity horticulture, protected cropping, around nursery stock, spot spraying in lawns and turf, commercial/industrial, domestic and public service areas, rights-of-way, bushland and forests, orchards and vineyards, fallow soil, tiled roofs, walls and rockeries: seedling and young annual and perennial weeds and grasses; algae, lichen, liverwort and moss; unwanted grapevine suckers.

Paths, driveways, gardens, around sheds, amenity horticulture areas, protected cropping situations, around nursery stock, spot spraying in lawns and turf (seedling and young annual and perennial weeds and grasses): 70 mL per litre of water. Spray to completely cover weed surface. Reapplication at around 7 days may be necessary if regrowth occurs. This product may damage lawn and turf when used as a spot spray. To control weeds in Protected cropping situations, apply on each side of the crop row taking care not to allow spray to contact any of the crop foliage. General uses including around buildings, commercial and industrial areas, domestic and public service areas, rights-of-way, bushland and forests: see the Directions for Use table on the registered label. Orchards and vineyards: 70 mL per litre of water. Apply 300 L spray per ha of orchard (band width of 800 mm per row). Apply as a band spray 400 mm wide on each side of the orchard or vine crop row. Apply at early vegetative stage of weeds. Best results are obtained at 4-8 leaf stage when weed canopy is less than 15 cm in height. Established weeds may require more than one application. Repeat spray after 7 days if required. Fallow soil: 7 litres per 100 litres water (i.e. 70 mL per litre of water). Apply 900 L - 1400 L spray per treated ha. Algae, lichen, liverwort and moss on gardens, paths, rockeries, tiled roofs, walls, driveways, around buildings, spot spraying in lawns and turf: 70 mL per litre of water. Spray to completely cover plant surface. For driveways or heavy infestations, clean off by brushing after 3 days and reapply if necessary. Grapevines, control of unwanted suckers (cane burning): 70 mL per litre of water. Apply as a spot spray directly to unwanted suckers, using sufficient water volume to achieve run-off. Ensure complete coverage of unwanted suckers. Apply as a downward, targeted application avoiding contact with green stems, foliage, fruit or flowers on the main plant. Use of hooded or shielded sprayers is recommended. Apply using a coarse droplet size. Apply to established vines and trees with young, non-lignified suckers up to 15cm long. Re-application may be required at 2-3 week intervals to treat new suckers, re-growth of treated suckers or longer suckers. Mixing: Half fill spray tank and commence agitation. Slowly add required amount of Slasher Organic Weedkiller. Top up with required quantity of water. Agitate well before commencing spray procedure. DO NOT spray if weeds are wet. DO NOT apply if rainfall is expected before spray dries on plant surfaces. DO NOT water treated area for 24 hours to achieve maximum results. DO NOT apply if heavy rains or storms that are likely to cause runoff from soil are forecast within 3 days of application. DO NOT irrigate to the point of runoff from soil for at least 3 days after application. DO NOT allow spray to contact or drift onto plants you do not want killed. Spray drift: DO NOT allow bystanders to come into contact with the spray cloud. DO NOT apply in a manner that may cause an unacceptable impact to native vegetation, agricultural crops, landscaped gardens and aquaculture production, or cause contamination of plant or livestock commodities, outside the application site from spray drift. Wherever possible, correctly use application equipment designed to reduce spray drift and apply when the wind direction is away from these sensitive areas. DO NOT apply unless the wind speed is between 3 and 20 kilometres per hour at the application site during the time of application. DO NOT apply if there are hazardous surface temperature inversion conditions present at the application site during the time of application. Do not enter treated areas until the product has dried. Always read the registered label before use (APVMA 68118).

Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Download Product Label (PDF)

View APVMA Registration

Always read the label and follow directions for use. The registered label is the legal document governing use of this product.

Download the Safety Data Sheet for this product:

Download SDS (PDF)

Required for safe handling and storage. Keep on-site per WHS regulations.