SHOTUP 20LT HERBICIDE (EQ: HOTSHOT) GROW CHOICE 800 20
- Active ingredient
- 10 g/L aminopyralid + 140 g/L fluroxypyr
- Controls
- Host: Winter cereals (wheat, barley, oats, triticale), pastures, non-crop areas, forests, rights-of-way. Target: Climbing buckwheat and other broadleaf weeds in cereal...
- Suitable for
- Winter cereals, pastures, non-crop areas, forests, rights-of-way
- Withholding period
- Harvest: not required when used as directed. Grazing: do not graze or cut crops for stock food for 7 days after application. — always confirm on the registered label
Shotup Herbicide is used for the control of climbing buckwheat and other broadleaf weeds in winter cereals, lantana and certain other pasture weeds.
Shotup Herbicide is used for the control of various pasture weeds, broadleaf weeds, climbing buckwheat, lantana & other woody weeds in various situations including pastures, winter cereals, non-crop areas, forests and rights of way.
Shotup Herbicide contains fluroxypyr and aminopyralid.
Aminopyralid is a pyridine carboxylic used as a selective, post-emergent herbicide to control key broadleaf weeds.
It is a new generation active ingredient that is effective at very low rates when compared with other herbicides.
Directions For Use:
Restraints:
DO NOT: apply to crops or weeds which are not actively growing or to plants which may be stressed (not actively growing) due to prolonged periods of extreme cold, moisture stress (water-logged or drought affected) or previous herbicide treatment, as crop damage or reduced levels of control may result.
DO NOT: spray if rain is likely to occur within one hour.
AVOID: double overlaps to reduce risk of injury to rotational crops the following season.
DO NO: apply by aerial application
Active Ingredient:
10 g/L AMINOPYRALID present as the triisopropanolamine salt
140 g/L FLUROXYPYR present as methylheptyl ester
SOLVENT: 416 g/L LIQUID HYDROCARBON
Active Ingredient: 10 g/L aminopyralid + 140 g/L fluroxypyr
Chemical Schedule: S6
APVMA Reg. No: 88924
For use on: Winter cereals, pastures, non-crop areas, forests, rights-of-way
Also sold as: Hotshot
Harvest: not required when used as directed. Grazing: do not graze or cut crops for stock food for 7 days after application.
Always read the current registered product label before use. Withholding periods must be observed before slaughter, milking, or egg collection. The label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.
Shotup (10 g/L aminopyralid + 140 g/L fluroxypyr, Group 4) is applied at crop-, weed- and method-specific label rates – there is no single dilution. Winter cereals: 500–750 mL/ha by boom from the 3-leaf to first-node stage (Z13–Z31), e.g. climbing buckwheat 500 mL/ha at 2–4 leaf or 750 mL/ha at 6–8 leaf, in the water volume specified on the label. Lantana and listed pasture weeds (thistles, docks, fireweed): high-volume spot spray at 700 mL per 100 L of water to thoroughly wet foliage, applied to actively growing plants (lantana October–April). Do not apply to stressed or non-actively growing plants, do not spray if rain is likely within one hour, avoid double overlaps, and do not apply by aircraft. Grazing/stock-food withholding 7 days. Aminopyralid is persistent: observe the label plant-back periods (cereals/canola 4–9 months; legumes 6–20 months) and do not use treated plant material or manure as mulch or compost. Refer to the registered label for the full directions-for-use table.
Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.
Always read the label and follow directions for use. The registered label is the legal document governing use of this product.
Download the Safety Data Sheet for this product:
Download SDS (PDF)Required for safe handling and storage. Keep on-site per WHS regulations.
Common Questions
What weeds does Shotup Herbicide control?
Shotup is used to control climbing buckwheat, lantana, woody weeds and various broadleaf weeds. It's effective in pastures, winter cereals, non-crop areas, forests and along rights of way. Always check the product label for a complete list of target weeds and permitted uses in your situation.
Can I spray if rain is forecast?
No. Do not spray if rain is likely to occur within one hour of application. Always check the label for full application conditions and timing advice.
What should I do to avoid crop damage?
Do not apply to crops or weeds that are not actively growing, or to plants stressed by extreme cold, drought, waterlogging or previous herbicide treatment, as this may cause crop damage or reduce control. Also avoid double overlaps to reduce the risk of injury to rotational crops the following season. See the label for full precautions.
Where can I find the safety and application details?
Always read the product label and Safety Data Sheet (SDS) before use. They contain essential information on application rates, mixing, safety directions, withholding periods and restraints. If you have questions, contact TGRM on (07) 5482 1692 or visit us at 55 Tozer St, Gympie. You can also speak to a veterinarian or agronomist for advice tailored to your property.
Is aerial application permitted?
No. Shotup Herbicide must not be applied by aerial application. Always use ground-based application methods as per the label instructions.
Do you ship this product Australia-wide?
As a regulated chemical, this product can only be transported by road freight, it cannot be sent via Australia Post or air freight. Call us on (07) 5482 1692 before ordering to confirm delivery to your area.
Mainland Australia only — we cannot deliver this product to Tasmania. It is classified as environmentally hazardous (harmful to aquatic life), which means it cannot be carried by sea or air freight. Tasmania and other offshore destinations can only be reached by a sea or air leg, so we are unable to send it there. It travels by road freight to mainland addresses as normal. Call us on (07) 5482 1692 if you are unsure about your address.
Can you deliver this to Tasmania?
No. This product is environmentally hazardous (harmful to aquatic life) and cannot legally be carried on sea or air freight. Because every route to Tasmania involves a sea or air crossing, we can only deliver it within mainland Australia. If you are in Tasmania, please call us on (07) 5482 1692 and we will help you find an alternative product.
Can I Click & Collect from Gympie?
Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.