RUBBER SPRING BEND 35MM TO FIT 38MM TUBE DAVIESWAY 0008

Install the rubber spring bend onto the 38mm tube by sliding the 35mm opening over the tube end until fully seated. Ensure the bend is positioned at the correct angle for your milking cluster setup and that all connections are tight to prevent vacuum leaks. Secure any clamps or fittings as required by your equipment configuration. Test the system under vacuum to confirm proper seal before commencing milking operations. Tips: Regularly inspect the rubber bend for cracks or deterioration, as this ensures optimal vacuum integrity and teat health. Apply a light coating of silicone-based lubricant to ease installation and removal during routine maintenance. Always work with the system depressurised when installing or removing components to prevent injury. Disclaimer: The information provided above is sourced from reputable industry references including Dairy Australia, FutureBeef, MLA, Business Queensland, GRDC and other recognised Australian agricultural authorities. It is intended as a general guide only. Results vary depending on your specific situation, animal class, soil type, climate and management practices. Tom Grady Rural Merchandise recommends consulting with your veterinarian, agronomist or relevant specialist before making product or management decisions for your property. Contact our team on (07) 5482 1692 — we're happy to help.