PROTECT-E 110LT DISINFECTANT FOR TEAT DIP AND SPRAY PTE110
- Active ingredient
- 61 g/L Chlorhexidine gluconate (5.54 g/L when diluted 1:10)
- Controls
- Host: Dairy cattle. Target: Mastitis-causing bacteria
- Suitable for
- Dairy cattle
- Withholding period
- Meat: 0 days. Milk: 0 days. — always confirm on the registered label
A highly effective chlorhexidene gluconate teat spray or dip sanitiser concentrate that helps control mastitis and other disease conditions of the udder and teat skin.
Protect-E concentrate contains a high level of complex emollients so that only water needs to be added.
Its ready to use emollient system saves time and money whilst maintaining superior udder health.
Dosage:
Make up a spray or dipping solution of Protect-E by adding 1 part Protect-E to 10 parts of water (100ml + 1000ml making 1100ml).
Provides a concentration of 5.54 g/L Chlorhexidene Gluconate
For optimum performance it is recommended to use only rain water when preparing solutions. Avoid contact with organic matter or metals.
Solutions prepared and kept in this manner will be stable for at least 14 days.
Teat Dipping:
At the end of milking dip each teat in Protect-E Teat Dip and Spray solution, using plastic or ceramic dip cups.
Teat Spraying:
Teats should be sprayed from below after each milking so as to completely cover the teats and teat openings.
Apply a conical spray using a ?ne nozzle and administer suf?cient spray to form a drop on the end of each teat.
Active Ingredient: 61 g/L Chlorhexidine gluconate (5.54 g/L when diluted 1:10)
Chemical Schedule: S6
APVMA Reg. No: 49116
For use on: Dairy cattle
Meat: 0 days. Milk: 0 days.
Always read the current registered product label before use. Withholding periods must be observed before slaughter, milking, or egg collection. The label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.
Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.
Always read the label and follow directions for use. The registered label is the legal document governing use of this product.
Common Questions
What is Protect-E used for?
Protect-E is a teat dip and spray sanitiser designed to help control mastitis and other disease conditions of the udder and teat skin in dairy cattle. It contains chlorhexidine gluconate as the active ingredient.
Can I use tap water to prepare Protect-E?
For optimum performance, it is recommended to use only rain water when preparing solutions. You should also avoid contact with organic matter or metals when mixing and storing.
How long will a prepared solution last?
When prepared correctly using rain water and stored properly away from organic matter and metals, a solution will remain stable for at least 14 days.
What's the difference between teat dipping and spraying with Protect-E?
Protect-E can be applied either way. For dipping, use plastic or ceramic dip cups at the end of milking. For spraying, apply the solution from below after each milking to completely cover the teats and teat openings. The product label will guide you on the best method for your situation.
Does Protect-E come ready to use?
Protect-E is a concentrate that must be diluted with water before use. It contains emollients built in, so you only need to add water to prepare the working solution. Always follow the mixing instructions on the registered product label.
Where can I find detailed safety and use information?
Always read the product label and Safety Data Sheet (SDS) before use. For specific advice on application, withholding periods, or any safety concerns, consult your veterinarian or agronomist, or contact TGRM on (07) 5482 1692 or visit us at 55 Tozer St, Gympie.
Do you ship this product Australia-wide?
Yes, but freight on this product is quoted individually rather than calculated at checkout. Because of its size, weight or bulk we need to arrange delivery and confirm the cost with you before dispatch. It is also available for local delivery or Click and Collect from our Gympie store. Call us on (07) 5482 1692 or email tgrmorders@tomgrady.com.au and we will quote freight to your address.
Can I Click & Collect from Gympie?
Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.