Ecolab Phaser Acidic Detergent Sanitiser 20L

Ecolab Phaser Acidic Detergent Sanitiser 20L

In Stock Pre order Out of stock
Out of Stock
Add to Wishlist
ⓘAvailable for local delivery or free Click & Collect from our Gympie store — call us on (07) 5482 1692 to arrange.
Order by 12 noon Mon–Friand we pick and pack it the same day. Couriers usually collect the same or next business day.
Click & Collectallow 3 hours for us to have your order ready at 55 Tozer St, Gympie.
Local deliveryfor large items and large orders around Gympie — call (07) 5482 1692.
Ecolab Phaser Acidic Detergent Sanitiser 20L at a glance
Active ingredient
149 g/L Phosphoric Acid, 23 g/L Sulphamic Acid, 126 g/L Sulphuric Acid (98%)
Withholding period
Nil — always confirm on the registered label

Phaser is a high performance acidic detergent sanitiser for the cleaning and sanitising of high velocity dairy milking plants and storage equipment.

Phaser may be used to clean at all temperatures and contains water conditioning agents to meet the demands of difficult water conditions, for example high iron and manganese water types.

Active constituents
149 g/L Phosphoric Acid
23 g/L Sulphamic Acid
126 g/L Sulphuric Acid (98%)

Withholding period: Nil. Use only after consulting your Ecolab Representative for specific use instructions and recommended dispensing equipment. Always read the registered label before use (APVMA 82505).

Active Ingredient: 149 g/L Phosphoric Acid, 23 g/L Sulphamic Acid, 126 g/L Sulphuric Acid (98%)

Chemical Schedule: S6

APVMA Reg. No: 82505

Nil

Always read the current registered product label before use. Withholding periods must be observed before slaughter, milking, or egg collection. The label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

This product should only be used after you have consulted your Ecolab Representative for specific use instructions and recommended dispensing equipment. Milking machine, before milking: rinse milk contact surfaces with at least 5 litres of clean cold water per set of cups. Milking machine, after milking (jetter and recirculation cleaning): (a) cold water rinse using at least 10 litres per set of cups; (b) hot water (70°C minimum) wash with Phaser at 0.15% (15 mL per 10 litres), allowing 7-10 litres per set of cups; (c) open plant to drain. Farm vat: clean the vat as soon as possible after milk collection. (a) Flush milk residues from the vat using cold water; (b) hot water (70°C minimum) wash with Phaser at 0.15% (15 mL per 10 litres); (c) manually clean sight glass, tap, elbow and valve with cleaning solution; (d) allow to drain. Cold water: a cold water wash with Phaser should only be used in support of a hot water clean and sanitise in a daily routine, using the same regime as for hot water. Routine hot chlorinated alkali counter-washes are recommended to prevent protein build-up at a frequency determined by plant operating characteristics and water quality. Safety: Will irritate eyes, nose and throat and skin. Avoid contact with eyes and skin. Do not inhale vapour or spray mist. When preparing product for use, wear elbow length neoprene gloves and face shield. Wash hands after use. Use in well ventilated facilities. Always read the registered label before use (APVMA 82505).

Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Download Product Label (PDF)

View APVMA Registration

Always read the label and follow directions for use. The registered label is the legal document governing use of this product.

Download the Safety Data Sheet for this product:

Download SDS (PDF)

Required for safe handling and storage. Keep on-site per WHS regulations.

Common Questions

What is Phaser used for?

Phaser is an acidic detergent sanitiser for the cleaning and sanitising of high velocity dairy milking plants and storage equipment.

What is the use rate?

The label directs a hot water (70°C minimum) wash with Phaser at 0.15% (15 mL per 10 litres). Consult your Ecolab Representative for specific use instructions and recommended dispensing equipment.

Are alkali counter-washes still recommended?

The label recommends routine hot chlorinated alkali counter-washes to prevent protein build-up, at a frequency determined by plant operating characteristics and water quality.

What protective equipment is needed?

When preparing product for use, wear elbow length neoprene gloves and a face shield. Avoid contact with eyes and skin, do not inhale vapour or spray mist, and wash hands after use.

Do you ship this product Australia-wide?

This is a dangerous good and cannot be sent by post or courier. It is available for local delivery around Gympie or for Click and Collect from our store at 55 Tozer St. Call us on (07) 5482 1692 to arrange.

Mainland Australia only — we’re unable to deliver this product to Tasmania. It is classified as environmentally hazardous (a marine pollutant), so it is regulated as a dangerous good for sea and air transport and our freight carriers will not accept it on those routes. Because every route to Tasmania and offshore destinations needs a sea or air leg, we can only deliver it to mainland addresses by road. Call us on (07) 5482 1692 if you are unsure about your address.

Can you deliver this to Tasmania?

Not at this time. This product is environmentally hazardous (a marine pollutant), so it is regulated as a dangerous good for sea and air freight and our carriers do not accept it on those routes. As every route to Tasmania involves a sea or air crossing, we can only deliver it within mainland Australia by road. If you are in Tasmania, please call us on (07) 5482 1692 and we will help you find an alternative product.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.