JOINER RURAL TEE POLY 2" (50mm) X 2" (50mm) PHILMAC 99836600

$70.40
In Stock Pre order Out of stock
12 in Stock
Add to Wishlist
JOINER RURAL TEE POLY 2" (50mm) X 2" (50mm) PHILMAC 99836600 at a glance

Philmac Rural can be easily disassembled and reconnected simply by loosening the nut and taking the insert out of the body of the fitting.

The pipe can then be freed.

Philmac Rural inserts are self aligning.

Simply bring the insert into the body of the fitting and then tighten the nut with a wrench.

As the nut tightens it will draw the insert into the body of the fitting to create the perfect seal every time.

The flat face of the insert allows the installer to tap it into the pipe with ease.

Because the insert does not need to pass over a seal there is no risk of damaging the seal during installation.

Philmac Rural has been a market leader in Australia for over 20 years, with a strong track record of performance in tough Australian conditions.

Rural, Safelok and Metric components are all interchangeable as they share a common body.

Ensure the poly pipe is cut square and clean before inserting into the barb fitting — push firmly until the pipe seats fully against the fitting shoulder. Secure the connection with two stainless steel hose clamps positioned close to the barb ridges, tightening evenly to create a watertight seal without over-tightening and damaging the poly. For best results, use clamps rated for the pipe diameter (typically 50-70mm for 2" fittings). Allow the system to settle for a few minutes before pressurising to check for leaks. Tips: Always use stainless steel clamps with barb fittings in rural applications — galvanised clamps will corrode and fail in Queensland's climate. For permanent installations in pump-fed systems, consider solvent weld fittings instead, as barb connections may eventually slip under sustained high pressure (approaching the 800kPa rating of rural poly pipe). Store fittings out of direct sunlight to prevent UV degradation of the poly material.

Common Questions

What is this fitting used for?

This is a Joiner Rural Tee — a 2" (50mm) Philmac fitting designed to join poly pipe. It's a T-shaped connector that lets you branch off in three directions. The Philmac Rural range is built for farm and rural applications and has been proven in tough Australian conditions for over 20 years.

How do I install it?

Simply push the insert into the body of the fitting, then tighten the nut with a wrench. As you tighten, the nut draws the insert into the body to create a seal. The insert is self-aligning and the flat face means you can tap it into the pipe easily — there's no risk of damaging the seal during installation because the insert doesn't need to pass over it.

Can I take it apart and reconnect it?

Yes. Simply loosen the nut and take the insert out of the body of the fitting. The pipe can then be freed. You can reassemble it whenever you need to.

Is it compatible with other Philmac fittings?

Yes. Rural, Safelok and Metric components are all interchangeable — they share a common body, so you can mix them in your system if needed.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via Australia Post or road courier. Select your preferred shipping method at checkout.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.