JOINER RURAL TEE POLY 3/4" X 20MM FEMALE PHILMAC 99842200

$12.85
In Stock Pre order Out of stock
20 in Stock
Add to Wishlist
JOINER RURAL TEE POLY 3/4" X 20MM FEMALE PHILMAC 99842200 at a glance

Philmac Rural can be easily disassembled and reconnected simply by loosening the nut and taking the insert out of the body of the fitting.

The pipe can then be freed.

Philmac Rural inserts are self aligning.

Simply bring the insert into the body of the fitting and then tighten the nut with a wrench.

As the nut tightens it will draw the insert into the body of the fitting to create the perfect seal every time.

The flat face of the insert allows the installer to tap it into the pipe with ease.

Because the insert does not need to pass over a seal there is no risk of damaging the seal during installation.

Philmac Rural has been a market leader in Australia for over 20 years, with a strong track record of performance in tough Australian conditions.

Rural, Safelok and Metric components are all interchangeable as they share a common body.

Insert the 20mm barb end firmly into rural poly pipe (green stripe) until fully seated, then secure with two stainless steel hose clamps positioned either side of the barb ridges and tightened evenly. Thread the 3/4" female end onto your water source or downstream fitting, ensuring the connection is hand-tight plus one full turn. For permanent installations, apply PTFE tape to threaded connections to prevent leaks. This tee fitting allows you to split flow into three directions: one inlet and two outlets. Tips: Always use stainless steel clamps on barb connections to prevent rust and ensure longevity in Queensland's climate. Avoid over-tightening threaded connections as rural poly can crack; hand-tight plus one turn is sufficient. Check that your rural poly pipe is rated to 800kPa to ensure compatibility with your system pressure before installation.

Common Questions

How do I install this Philmac fitting?

The insert is self aligning — simply bring it into the body of the fitting and tighten the nut with a wrench. As the nut tightens, it will draw the insert into the body to create a perfect seal. The flat face of the insert lets you tap it into the pipe with ease, and because the insert doesn't need to pass over a seal, there's no risk of damaging it during installation.

Can I take this fitting apart and reconnect it?

Yes. Philmac Rural fittings can be easily disassembled and reconnected by simply loosening the nut and taking the insert out of the body. You can then free the pipe, and reconnect it whenever you need to.

Will this Philmac fitting work with other brands?

Philmac Rural, Safelok and Metric components are all interchangeable as they share a common body, so they'll work together without any issues.

How proven is Philmac Rural in Australian conditions?

Philmac Rural has been a market leader in Australia for over 20 years, with a strong track record of performance in tough Australian conditions.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via Australia Post or road courier. Select your preferred shipping method at checkout.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.