JOINER RURAL TEE POLY 3/4" (20mm) X 3/4" (20mm) PHILMAC 99832200

$17.85
In Stock Pre order Out of stock
8 in Stock
Add to Wishlist
JOINER RURAL TEE POLY 3/4" (20mm) X 3/4" (20mm) PHILMAC 99832200 at a glance

Philmac Rural can be easily disassembled and reconnected simply by loosening the nut and taking the insert out of the body of the fitting.

The pipe can then be freed.

Philmac Rural inserts are self aligning.

Simply bring the insert into the body of the fitting and then tighten the nut with a wrench.

As the nut tightens it will draw the insert into the body of the fitting to create the perfect seal every time.

The flat face of the insert allows the installer to tap it into the pipe with ease.

Because the insert does not need to pass over a seal there is no risk of damaging the seal during installation.

Philmac Rural has been a market leader in Australia for over 20 years, with a strong track record of performance in tough Australian conditions.

Rural, Safelok and Metric components are all interchangeable as they share a common body.

Insert the poly pipe firmly onto the barbed ends of the tee fitting until fully seated. Secure each connection with a stainless steel hose clamp positioned over the barb, tightening evenly to create a watertight seal without over-tightening and damaging the pipe. For permanent installations, ensure the pipe is clean and free from dirt before insertion. This fitting is suitable for both gravity-fed and pump-fed rural water systems up to 800kPa. Tips: Always use stainless steel clamps with barb fittings to prevent rust and corrosion in Queensland's climate. Measure your existing poly pipe diameter (typically stamped on the pipe) to ensure correct fitting size — this tee accepts 3/4" (20mm) connections on all three ports. Consider solvent weld fittings for permanent installations where disconnection won't be needed.

Common Questions

What size is this fitting?

This is a joiner tee with 3/4" (20mm) connections on all three ports.

How do I install the Philmac fitting?

Simply bring the insert into the body of the fitting and then tighten the nut with a wrench. As the nut tightens it will draw the insert into the body to create a perfect seal. The flat face of the insert allows you to tap it into the pipe with ease, and because the insert doesn't need to pass over a seal there's no risk of damaging it during installation.

Can I take the fitting apart if I need to?

Yes. Philmac Rural can be easily disassembled and reconnected simply by loosening the nut and taking the insert out of the body of the fitting. The pipe can then be freed.

Is this fitting compatible with other Philmac ranges?

Yes. Rural, Safelok and Metric components are all interchangeable as they share a common body.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via Australia Post or road courier. Select your preferred shipping method at checkout.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.

Ask a Question
SKU: 99832200
Categories: Fittings & Valves Water Supplies
Tags: 20mm Pipe cat:water-fittings Philmac Water