JOINER RURAL TEE POLY 1" (25mm) X 1" (25mm) PHILMAC 99833300

$27.75
In Stock Pre order Out of stock
7 in Stock
Add to Wishlist
JOINER RURAL TEE POLY 1" (25mm) X 1" (25mm) PHILMAC 99833300 at a glance

Philmac Rural can be easily disassembled and reconnected simply by loosening the nut and taking the insert out of the body of the fitting.

The pipe can then be freed.

Philmac Rural inserts are self aligning.

Simply bring the insert into the body of the fitting and then tighten the nut with a wrench.

As the nut tightens it will draw the insert into the body of the fitting to create the perfect seal every time.

The flat face of the insert allows the installer to tap it into the pipe with ease.

Because the insert does not need to pass over a seal there is no risk of damaging the seal during installation.

Philmac Rural has been a market leader in Australia for over 20 years, with a strong track record of performance in tough Australian conditions.

Rural, Safelok and Metric components are all interchangeable as they share a common body.

Insert the barbed ends of the tee fitting into the poly pipe, ensuring the pipe is pushed fully onto each barb until it seats firmly. Secure each connection with a stainless steel hose clamp positioned just below the barb, tightening with a screwdriver until snug but not over-tightened. For a more permanent installation, consider using solvent weld fittings instead. Always check that the 1" (25mm) sizing matches your pipe's inner diameter before installation. Tips: Use stainless steel clamps rather than galvanised to prevent corrosion and ensure longevity in Queensland's climate. For gravity-fed rural systems, 1" poly pipe is typically standard, but verify your system's pressure requirements—most green-stripe poly is rated to 800kPa. Pre-warm the poly pipe slightly in hot water before fitting barbs to make insertion easier, especially in cooler weather.

Common Questions

How do I install this Philmac tee fitting?

Simply bring the insert into the body of the fitting and tighten the nut with a wrench. As the nut tightens, it will draw the insert into the body to create a seal. The flat face of the insert lets you tap it into the pipe with ease, and because the insert doesn't need to pass over a seal, there's no risk of damaging it during installation.

Can I take this fitting apart and reconnect it?

Yes. Philmac Rural fittings are easily disassembled and reconnected by simply loosening the nut and taking the insert out of the body. Once the pipe is freed, you can reconnect it the same way you installed it initially.

Are Philmac Rural fittings reliable in Australian conditions?

Philmac Rural has been a market leader in Australia for over 20 years with a strong track record of performance in tough Australian conditions, so they're built to last in rural use.

Will this fitting work with other Philmac components?

Yes. Rural, Safelok and Metric components are all interchangeable as they share a common body.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via Australia Post or road courier. Select your preferred shipping method at checkout.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.