JOINER RURAL END CONNECTOR POLY 2" X 50MM MALE PHILMAC 99826600

$24.60
In Stock Pre order Out of stock
12 in Stock
Add to Wishlist
JOINER RURAL END CONNECTOR POLY 2" X 50MM MALE PHILMAC 99826600 at a glance

Philmac Rural can be easily disassembled and reconnected simply by loosening the nut and taking the insert out of the body of the fitting.

The pipe can then be freed.

Philmac Rural inserts are self aligning.

Simply bring the insert into the body of the fitting and then tighten the nut with a wrench.

As the nut tightens it will draw the insert into the body of the fitting to create the perfect seal every time.

The flat face of the insert allows the installer to tap it into the pipe with ease.

Because the insert does not need to pass over a seal there is no risk of damaging the seal during installation.

Philmac Rural has been a market leader in Australia for over 20 years, with a strong track record of performance in tough Australian conditions.

Rural, Safelok and Metric components are all interchangeable as they share a common body.

Ensure the poly pipe is cut square and clean before inserting into the barb connector. Push the pipe firmly onto the male barb until it reaches the shoulder of the fitting, twisting slightly if needed to seat properly. Secure with two stainless steel hose clamps positioned just above and below the barb ridge, tightening evenly to prevent pipe slippage. This fitting is suitable for connecting flexible hose or poly pipe in gravity-fed or low-pressure rural water systems. Tips: Always use stainless steel clamps with barb fittings to prevent corrosion and ensure a reliable seal in Queensland's coastal and inland climates. For permanent installations, consider solvent weld fittings instead; barb connections are better suited for temporary or adjustable setups. Check that your poly pipe outer diameter matches the 50mm (approximately 2" nominal) size of this connector to avoid poor fitment.

Common Questions

How do I install this end connector?

The insert is self aligning — simply bring it into the body of the fitting and tighten the nut with a wrench. As the nut tightens, it draws the insert into the body to create a seal. The flat face of the insert lets you tap it into the pipe easily, and since the insert doesn't pass over a seal, there's no risk of damaging it during installation.

Can I take it apart if I need to?

Yes. Philmac Rural fittings can be easily disassembled and reconnected by simply loosening the nut and taking the insert out of the body. The pipe can then be freed.

Will this fitting work with other Philmac components?

Yes. Rural, Safelok and Metric components are all interchangeable as they share a common body, so you can mix and match them in your system.

How reliable is this fitting in Australian conditions?

Philmac Rural has been a market leader in Australia for over 20 years with a strong track record of performance in tough Australian conditions.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via Australia Post or road courier. Select your preferred shipping method at checkout.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.