JOINER RURAL ELBOW 90D POLY 1 1/4" X 32MM FEMALE PHILMAC 99864400

$22.60
In Stock Pre order Out of stock
17 in Stock
Add to Wishlist
JOINER RURAL ELBOW 90D POLY 1 1/4" X 32MM FEMALE PHILMAC 99864400 at a glance

Philmac Rural can be easily disassembled and reconnected simply by loosening the nut and taking the insert out of the body of the fitting.

The pipe can then be freed.

Philmac Rural inserts are self aligning.

Simply bring the insert into the body of the fitting and then tighten the nut with a wrench.

As the nut tightens it will draw the insert into the body of the fitting to create the perfect seal every time.

The flat face of the insert allows the installer to tap it into the pipe with ease.

Because the insert does not need to pass over a seal there is no risk of damaging the seal during installation.

Philmac Rural has been a market leader in Australia for over 20 years, with a strong track record of performance in tough Australian conditions.

Rural, Safelok and Metric components are all interchangeable as they share a common body.

Before installation, ensure the poly pipe is cut square and clean of debris. Push the pipe firmly onto the barb fitting until it reaches the shoulder, then secure with two stainless steel hose clamps positioned either side of the barb ridges, tightening evenly. This elbow fitting redirects water flow at 90 degrees and is suitable for both gravity-fed and pump systems up to 800kPa. Always allow adequate space around the fitting for clamp tightening. Tips: Use stainless steel clamps rather than galvanised to prevent corrosion in rural water systems. For easier future disconnection, consider compression fittings at valve connection points instead of permanent barb installations. Test the system at working pressure before leaving the installation unattended.

Common Questions

What size is this elbow fitting?

This is a 90 degree elbow in 1 1/4" x 32mm, with female Philmac connections on both ends.

How do I install a Philmac Rural fitting?

Philmac Rural fittings are self-aligning. Simply bring the insert into the body of the fitting and tighten the nut with a wrench. As the nut tightens, it will draw the insert into the body to create a seal. The flat face of the insert allows you to tap it into the pipe with ease, and there's no risk of damaging the seal during installation.

Can I take the fitting apart if needed?

Yes. Philmac Rural fittings can be easily disassembled and reconnected by simply loosening the nut and taking the insert out of the body. You can then free the pipe.

Are Philmac Rural fittings reliable?

Philmac Rural has been a market leader in Australia for over 20 years with a strong track record of performance in tough Australian conditions.

Will this work with other Philmac components?

Yes. Rural, Safelok and Metric components are all interchangeable as they share a common body.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via Australia Post or road courier. Select your preferred shipping method at checkout.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.