JOINER RURAL ELBOW 90D POLY 3/4" X 20MM FEMALE PHILMAC 99862200

$12.85
In Stock Pre order Out of stock
11 in Stock
Add to Wishlist
JOINER RURAL ELBOW 90D POLY 3/4" X 20MM FEMALE PHILMAC 99862200 at a glance

Philmac Rural can be easily disassembled and reconnected simply by loosening the nut and taking the insert out of the body of the fitting.

The pipe can then be freed.

Philmac Rural inserts are self aligning.

Simply bring the insert into the body of the fitting and then tighten the nut with a wrench.

As the nut tightens it will draw the insert into the body of the fitting to create the perfect seal every time.

The flat face of the insert allows the installer to tap it into the pipe with ease.

Because the insert does not need to pass over a seal there is no risk of damaging the seal during installation.

Philmac Rural has been a market leader in Australia for over 20 years, with a strong track record of performance in tough Australian conditions.

Rural, Safelok and Metric components are all interchangeable as they share a common body.

Slide the 20mm barb end onto green-stripe rural poly pipe, ensuring the pipe is clean and dry before insertion. Secure the connection using two stainless steel hose clamps positioned tightly around the barb, one near the pipe end and one further back for maximum grip. Thread the 3/4" female end onto your compatible threaded component (such as a tap or valve) using thread seal tape or plumber's putty to prevent leaks. Tighten all connections firmly but do not over-tighten, as this can damage the poly fitting. Tips: Always use stainless steel clamps with barb fittings in rural applications to prevent rust and corrosion in Queensland's climate. For easier future disconnection, consider compression or threaded fittings at key points rather than relying solely on barb connections. Check that your system pressure does not exceed 800kPa, as rural poly pipe is rated to this maximum pressure.

Common Questions

What is this fitting used for?

This is a Philmac Rural elbow fitting designed to join poly pipe. The 90-degree angle lets you change direction in your rural water or irrigation lines. It suits 3/4" poly pipe and has a 20mm female connection on one end.

How do I install it?

Bring the insert into the body of the fitting and tighten the nut with a wrench. As you tighten, the nut draws the insert into the fitting to create a seal. The flat face of the insert lets you tap it into the pipe easily, and because the insert doesn't pass over a seal, there's no risk of damaging it during installation.

Can I take it apart later if I need to?

Yes. Philmac Rural fittings can be easily disassembled and reconnected by simply loosening the nut and taking the insert out of the body. You can then free the pipe and reconnect whenever you need to.

Is this a reliable product?

Philmac Rural has been a market leader in Australia for over 20 years with a strong track record of performance in tough Australian conditions. The self-aligning inserts and design create a reliable seal every time.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via Australia Post or road courier. Select your preferred shipping method at checkout.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.