JOINER NIPPLE REDUCER BSP 1” (25mm) X 3/4" (20mm) PHILMAC 90423200

$3.10
In Stock Pre order Out of stock
11 in Stock
Add to Wishlist
JOINER NIPPLE REDUCER BSP 1” (25mm) X 3/4" (20mm) PHILMAC 90423200 at a glance

Philmac’s robust threaded fittings provide precision BSP tapered threads that have been engineered to maximise sealing performance.

The versatile range is made from high performance, UV resistant polypropylene that does not absorb moisture.

Installation is quick, simple and reliable every time.

The material is also potable water (AS/NZ 4020) approved. (Note: Products marked “Ancillary” are not potable water approved.)

Philmac’s threaded fittings provide maximum versatility, delivering a high performance connection across a wide range of pressure ratings and chemical combinations.

The hexagonal body makes them extremely simple to install. Importantly, Philmac threaded fittings are suitable for working pressures up to PN16 for sizes up to 2”, PN12 for 2-1/2” and PN10 for 3” and 4” sized fittings.

Smart hexagonal design makes the fittings compatible with tools and ensures that Philmac BSP threaded fittings are extremely easy to install.

Philmac threaded fittings are manufactured from high quality materials that ensure strong connections for many years.

The material also has a high degree of UV resistance to ensure long term performance even in direct sunlight.

This joiner nipple reducer connects two poly pipe sizes (1" to 3/4") using BSP threaded connections on both ends. Wrap thread tape around the male threads 3-4 times clockwise before screwing into female fittings hand-tight, then use an adjustable wrench for a final quarter turn. Ensure pipes are cut square and clean before connecting, and check that the reducer is oriented correctly for your flow direction. Do not over-tighten as this can crack the fitting. Tips: Use this fitting at connection points like pump outlets or filter assemblies where you need to step down from larger to smaller pipe diameter. Install in easily accessible locations so you can service or disconnect the fitting if needed. For permanent installations, consider solvent weld fittings instead; threaded fittings allow easier future disconnection but may require periodic tightening.

Common Questions

What size threads does this joiner nipple have?

This is a reducer with BSP tapered threads: 1" (25mm) on one end and 3/4" (20mm) on the other. It's designed to connect pipes of different sizes.

Is it safe for drinking water?

Yes. This fitting is potable water approved to AS/NZ 4020, so it's safe to use in drinking water systems.

What's it made from and will it handle UV?

It's made from high performance UV resistant polypropylene that doesn't absorb moisture. The material is designed to perform well in direct sunlight and last for many years.

How hard is it to install?

Installation is quick and simple. The hexagonal body design makes it easy to grip with tools and ensures reliable connections every time.

What pressure can it handle?

This fitting is suitable for working pressures up to PN16 for sizes up to 2". Check the product label or contact TGRM on (07) 5482 1692 if you need to confirm the exact pressure rating for your application.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via Australia Post or road courier. Select your preferred shipping method at checkout.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.

Ask a Question
SKU: 90423200
Categories: Fittings & Valves Water Supplies
Tags: 20mm Pipe 25mm Pipe cat:water-fittings Philmac Water