INCITEC PIVOT FERTILISERS - MAP 25KG 935300
| Quantity |
|---|
One of the major cropping fertilisers used in Australia as a source of phosphorus and nitrogen, MAP and MAP blends are used extensively in cropping systems and for sowing pastures.
The low level of nitrogen makes it useful as a starter fertiliser and as there is no free ammonia, the risk of affecting germinating seeds is minimal.
Features:
MAP is a high analysis source of phosphorus.
A cost effective granular product.
Low in heavy metals.
Good handling characteristics.
The nitrogen in MAP is in the ammonium form, which resists leaching and is a slower release form of nitrogen.
The product has an acid reaction in the soil which can be an advantage in neutral and high pH soils.
Therefore MAP is used in preference to DAP on alkaline soils.
Storage & Handling:
Will store freely in shed storage for extended periods with little concern about moisture uptake.
Covering with a tarp will greatly reduce any moist air uptake.
The use of augers may damage the fertiliser and increase any handling problems.
Do not leave exposed to moist air.
Either fill or empty (completely), the drill or air-seeder fertiliser box overnight.
Raise the equipment tynes from the soil to stop moisture moving up the tubes.
Restrictions:
For sowing there is little risk of affecting germination, even at high rates. As a general rule, a maximum of 20kg/ha of nitrogen at seeding of cereals should be used.
When applying MAP, the fertiliser should be banded 5cm away from the seed, either below or to the side.
MAP is low in sulphur; consider using Impact Goldphos or a MAP Sulphate of Ammonia blend in crops with a high sulphur requirement.
Do not store in silos.
Common Questions
What is MAP and what is it used for?
MAP is one of the major cropping fertilisers used in Australia. It's a high analysis source of phosphorus and nitrogen, used extensively in cropping systems and for sowing pastures. The low level of nitrogen makes it useful as a starter fertiliser, and because there is no free ammonia, the risk of affecting germinating seeds is minimal.
Why would I use MAP instead of DAP?
MAP has an acid reaction in the soil, which can be an advantage in neutral and high pH soils. For this reason, MAP is used in preference to DAP on alkaline soils.
How should I store MAP?
MAP will store freely in shed storage for extended periods with little concern about moisture uptake. Covering with a tarp will greatly reduce any moist air uptake. Do not leave it exposed to moist air, and do not store in silos. Either fill or empty your drill or air-seeder fertiliser box completely overnight, and raise the equipment tynes from the soil to stop moisture moving up the tubes.
How should MAP be applied at seeding?
When applying MAP, the fertiliser should be banded 5cm away from the seed, either below or to the side. There is little risk of affecting germination, even at high rates. As a general rule, a maximum of 20kg/ha of nitrogen at seeding of cereals should be used.
Is MAP low in any nutrients I should know about?
MAP is low in sulphur. If you're growing crops with a high sulphur requirement, consider using Impact Goldphos or a MAP Sulphate of Ammonia blend instead.
Do you ship this product Australia-wide?
Yes, this product ships Australia-wide via road courier. It is too large or heavy for Australia Post. Call us on (07) 5482 1692 if you have any questions about delivery to your area.
Can I Click & Collect from Gympie?
Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.