GATE N SURE GAL 1170 X 4770MM (16FT) CYCLONE 275618
N-Sure® Field Gates
The patented N-Sure® field gate is a strong ‘multi purpose’ rural gate.
Welded mesh insert features graduated horizontal wires which increase the density of the strands in the lower part of the gate.
Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
Welded collar attached at hinge end to increase compatibility with a broader range of gate hardware, including brooker hinges.
The pipe used in the gate frame and brace is hot dipped galvanised both inside and out, providing corrosion resistance.
MOQ's packed with both left and right hand side configurations, palletised for safer and easier handling.
Top and bottom 3mm plate steel gusset adds vertical load carrying capacity at free swinging end of the gate, reducing gate sag increasing ability to absorb downward pressure from larger livestock.
Full notch weld construction for added strength.
Brooker variant available in WA, with 20mm x 400mm Booker top and bottom hinge pre-fitted. Latch included.
Specifications:
*Manufacturer: Cyclone
*Part Number: 275618
*Product Type: N-Sure Galvanised Field Gate
*Height: 1170 mm
*Width: 4770 mm (16 ft opening)
*Approximate Weight: 43 kg
*Material: Hot-dipped galvanised steel
*Wall Thickness: 2 mm
*Finish: Galvanised inside and out
Common Questions
What makes the N-Sure field gate different from a standard gate?
The N-Sure gate has a patented welded mesh insert with graduated horizontal wires — the mesh is denser at the bottom and opens up toward the top. The bottom mesh spacing is tighter, and it gradually increases to larger spacing higher up. It's also built from hot-dipped galvanised pipe with a 2mm wall thickness, and includes top and bottom steel gussets at the free swinging end to reduce sag and help it handle downward pressure from livestock.
Will this gate rust?
No. The pipe frame and brace are hot-dipped galvanised both inside and out, which provides corrosion resistance. The galvanising protects the steel in rural conditions.
What size is this gate?
The height is 1170 mm and the width is 4770 mm, which gives a 16 ft opening. It weighs approximately 43 kg.
Can I get this with hinges and a latch already fitted?
Yes. A Brooker variant is available in WA with 20mm x 400mm Brooker top and bottom hinges pre-fitted, and a latch is included. Standard gates also have a welded collar at the hinge end to increase compatibility with a broader range of gate hardware, including Brooker hinges.
Do you ship this product Australia-wide?
Yes, but freight on this product is quoted individually rather than calculated at checkout. Because of its size, weight or bulk we need to arrange delivery and confirm the cost with you before dispatch. It is also available for local delivery or Click and Collect from our Gympie store. Call us on (07) 5482 1692 or email tgrmorders@tomgrady.com.au and we will quote freight to your address.
Can I Click & Collect from Gympie?
Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.