GATE FITTING BOLT THRU TIMBER POST HINGE SET 400MM ROTECH FG3E400

$31.75
In Stock Pre order Out of stock
44 in Stock
Add to Wishlist
Buying in bulk? Get a quote
GATE FITTING BOLT THRU TIMBER POST HINGE SET 400MM ROTECH FG3E400 at a glance

Aa strong and simple to use gate kit,

The bolt-through timber post gate kits are a quick and easy all round gate kit.

All of the gate kits are made from hot dipped galvanised steel to ensure strong and long-lasting kit.

The timber post gate kit comes in a 400mm length perfect for most standard timber posts, with a 16mm thread, it can be easily installed with an 18mm auger.

Adjustable Nylon Gudgeon which is fully adjustable.

The top strap is also fitted with an adjustable keeper plate to keep your gate locked in nice and tight without any unwanted movement.

The nylon gudgeon itself is non-tapered except for the slight tapering at the top so you can easily push your gate on.

Within the gudgeon is a metal pin for added strength.

It has been designed to be taller than most other gudgeons for extra secure.

The longer length means that it is harder to pull the bottom of the gate off.

The nylon gudgeon is designed to fit fully inside the gate where the sun can’t reach it to avoid UV damage.

Included:
A bottom gudgeon with a 25NB nylon bush.
Top strap.
A removable keeper plate.
Four nuts and four 50mm washers.

Bolt the hinge set straight through your timber post using the bolt holes provided — make sure your post is solid and at least 100mm x 100mm to handle the load. Line up both hinges vertically on the post face, spacing them evenly, and tighten the bolts firmly but don't over-torque or you'll strip the timber. Hang your gate on the hinges and adjust until it swings freely without binding at the top or bottom. Tips: Use a decent quality bolt and washer — cheap hardware will rust out in a couple of seasons and your gate'll start sagging. Check your timber post is straight and solid before you install; a wonky post will make your gate hang poorly no matter how good the hinges are. If your gate's heavy or you're in a windy area, don't cheap out on the hinge quality — this Rotech set is built for the job.

Common Questions

What's included in this gate hinge set?

The kit includes a bottom gudgeon with a 25NB nylon bush, a top strap, a removable keeper plate, four nuts, and four 50mm washers. Everything you need for a complete bolt-through installation.

What size timber posts does this suit?

The 400mm length is designed for standard timber posts. The 16mm thread can be easily installed with an 18mm auger, so it'll work with posts that accommodate those dimensions.

Is the gudgeon adjustable?

Yes. The nylon gudgeon is fully adjustable, and the top strap has an adjustable keeper plate as well to keep your gate locked tight without any unwanted movement.

Why is this hinge set durable?

The kit is made from hot dipped galvanised steel for strength and long-lasting performance. The nylon gudgeon is designed to sit fully inside the gate where the sun can't reach it, which protects it from UV damage. The gudgeon also has a metal pin inside for added strength, and it's taller than most others so the gate is harder to pull off at the bottom.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via Australia Post or road courier. Select your preferred shipping method at checkout.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.