FLOAT VALVE LEVER ARM 300MM M10 SS COCKY VALVE 0625

Directions for Use This 300mm stainless steel lever arm is designed for use with Ulti Flo float valves. The M10 threaded end connects directly to the valve body, and a ball float mounts to the opposite end of the arm to control the water level in your tank or trough. 1. Thread the M10 end of the lever arm firmly into your Ulti Flo float valve body. 2. Attach your ball float securely to the other end of the arm. 3. Fit the assembled valve and arm into your tank or trough inlet. 4. Connect your water supply line to the valve inlet. 5. Turn the supply on slowly and allow the float to rise with the water level. 6. Adjust the arm angle as needed so the valve shuts off at your desired water level. 7. Check all connections for leaks once the system is running. Tips: This arm is machined from 10mm stainless steel 316 rod, making it well suited to tough rural conditions including bore and dam-fed systems. Keep the arm moving freely and inspect periodically for scale or debris build-up, particularly in hard water areas. For shut-off pressure specifications and float sizing requirements, refer to the Ulti Flo manufacturer's guidelines to make sure your setup suits your supply pressure.