FIXED TEE 32NB THRU X 50NB BUTT PIPE GALVANISED DOWNEE T3250

Install the tee by inserting the 32NB pipe into the branch opening and the 50NB pipe into the butt opening, ensuring pipes are clean and free of debris before assembly. Secure using appropriate galvanised bolts and clamps rated for the pipe diameter, tightening evenly to prevent leaks. For water or fuel lines, apply thread sealant tape to any threaded connections before final assembly. Always support the joined pipes adequately to prevent stress on the connection points. Tips: Check that both pipe ends are cut square and clean before fitting—rough edges or dirt will cause poor seals and eventual leaks under pressure. Galvanised fittings perform best when you keep them dry during storage; stack them indoors or under cover to prevent corrosion and extend their life. If you're running water through this, flush the line thoroughly after installation to clear any swarf or manufacturing residue that could block drinkers or spray equipment.