DASCO ULTRA ACID 110LT ACID DETERGENT UA110
Ultra-Acid is a lo-foam liquid acid detergent for milk-stone control and removal.
Designed for use in all water conditions, especially dam, bore and channel waters.
Helps prevent organic and colloidal separation in poor water quality areas.
Strongest acid dairy detergent in Australia.
Features:
Removes milk-stone, mineral and water scale residues
Ideal for automated C.I.P. cleaning systems
Avoids organic separation with hard or dirty water
Low foaming – can be used with all air injectors
Maximum cleaning power at low concentrations
Cost effective at recommended dose rates
Directions of Use:
Pre-Rinse system thoroughly with clear water at 40 to 45°C. Do not recirculate. Drain until clear.
Wash Cycle:
Use Ultra-Acid in hot water (85°C). At 15 millilitres / 10 litres. Use a minimum of 7.5 litres per set of cups. If circulating do not allow wash solution to drop below 60°C
Final Rinse:
Rinse plant with hot water (85°C). Use a minimum of 7.5 litres per set of cups
Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.
Always read the label and follow directions for use. The registered label is the legal document governing use of this product.
Download the Safety Data Sheet for this product:
Download SDS (PDF)Required for safe handling and storage. Keep on-site per WHS regulations.
Common Questions
What is DASCO ULTRA ACID used for?
DASCO ULTRA ACID is a liquid acid detergent designed for milk-stone control and removal in dairy cleaning systems. It removes milk-stone, mineral and water scale residues and is ideal for automated C.I.P. (Clean-in-Place) cleaning systems.
Can I use it with poor water quality?
Yes. DASCO ULTRA ACID is designed for use in all water conditions, especially dam, bore and channel waters. It helps prevent organic and colloidal separation in poor water quality areas.
Is it suitable for automated systems?
Yes. DASCO ULTRA ACID is formulated for automated C.I.P. cleaning systems and has low foaming properties, so it can be used with all air injectors without causing foaming problems.
Where can I find dosing and safety information?
All directions for use, including water temperatures, application rates and safety precautions, are detailed on the product label and Safety Data Sheet (SDS). Always read and follow the label instructions carefully. If you have questions, contact TGRM on (07) 5482 1692 or visit 55 Tozer St, Gympie.
What size container does it come in?
DASCO ULTRA ACID is supplied in a 110-litre container, making it cost-effective for regular dairy cleaning operations.
Do you ship this product Australia-wide?
Yes, but freight on this product is quoted individually rather than calculated at checkout. Because of its size, weight or bulk we need to arrange delivery and confirm the cost with you before dispatch. It is also available for local delivery or Click and Collect from our Gympie store. Call us on (07) 5482 1692 or email tgrmorders@tomgrady.com.au and we will quote freight to your address.
Can I Click & Collect from Gympie?
Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.