Dasco Rev-Wash Alkaline Low Foam Dairy Detergent 20L
- Active ingredient
- 403 g/L Sodium Hydroxide
Rev-Wash is a low-foam heavy duty liquid alkaline detergent ideally suited for automatic washing systems or reverse flow plants.
It can be used with the hardest of water without changing the amounts used.
Features:
Suitable for all water types
Ideal for automated C.I.P. cleaning systems
Maximum cleaning power at low concentrations
Cost effective at recommended dose rates
Removes protein & butterfat residues
Keeps fat deposit in solution
Low Foaming – can be used with all air injectors
Can be used in parlour and milk tank
Directions of Use:
Pre-Rinse system thoroughly with clear water at 40-45°C. Do not recirculate.
Drain until clear.
Wash Cycle:
Use Rev-Wash in hot water (85°C).
At 15 millilitres / 10 litres. Use a minimum of 7.5 litres per set of cups.
If circulating do not allow wash solution to drop below 60°C
Rinse plant with hot water (85°C).
Use a minimum of 7.5 litres per set of cups
Active Constituent:
400G/L Sodium Hydroxide
Active Ingredient: 403 g/L Sodium Hydroxide
Chemical Schedule: S6
APVMA Reg. No: 30075
Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.
Always read the label and follow directions for use. The registered label is the legal document governing use of this product.
Download the Safety Data Sheet for this product:
Download SDS (PDF)Required for safe handling and storage. Keep on-site per WHS regulations.
Common Questions
What is Dasco Rev-Wash used for?
Rev-Wash is a heavy duty liquid alkali detergent registered for milking machines – evening alkali cleaning. It is labelled Lo Foaming.
What rate do I use?
The label rate is 40 mL per 10 litres of hot water (60°C), using a minimum of 10 litres per set of cups, followed by a rinse of very hot water (80°C). Always read the registered label before use (APVMA 30075).
What is the active constituent?
403 g/L sodium hydroxide. It is a Schedule 6 poison.
What safety gear do I need?
The label states the product is corrosive and may produce severe burns. Wear elbow-length PVC gloves and a face shield or goggles. Dangerous to fish. Do not contaminate streams, rivers, or waterways with the chemical or used containers.
Do you ship this product Australia-wide?
Yes, this product ships Australia-wide via road courier. Liquids, gels and pastes cannot be sent by Australia Post. Call us on (07) 5482 1692 if you have any questions about delivery to your area.
Can I Click & Collect from Gympie?
Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.