DASCO ELIMINATE SANITIZER 200LT MULTI-TEMP (ACID) EL200
Eliminate is a sanitiser and acid detergent which is equally biocidal in waters of all concentrations of hardness.
Eliminate contains no iodine, chlorine or quaternary (QUATS).
It is suitable for re-use in acid sanitising systems and works in both hot and cold water
Features:
For sanitising after hot wash of milking plant and Vat
Removes milk-stone and water scale residues
Inhibits bacterial growth
Effective in cold, warm or hot water temperatures
Ideal for automated C.I.P. cleaning systems
Can be used as a pre-milking sanitiser if required
Non residual formulation – leave to drain in plant
Avoids organic separation with hard water
Low foaming – can be used with all air injectors
Avoids residues which can exist with iodine, chlorine or quaternary ammonia based products
Directions Before Milking:
Pre-Rinse system thoroughly with clear water at 40 to 45°C. Do not recirculate.
Drain until clear.
Wash Cycle:
Use Acid / Alkali in hot water (85°C). At recommended rates
Final Rinse:
Use Eliminate at 20 millilitres per 10 litres (All Temperatures)
Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.
Download the Safety Data Sheet for this product:
Download SDS (PDF)Required for safe handling and storage. Keep on-site per WHS regulations.
Common Questions
What is Eliminate sanitiser used for?
Eliminate is a sanitiser and acid detergent designed for sanitising milking plant and vats after hot wash. It removes milk-stone and water scale residues, inhibits bacterial growth, and is suitable for use in both hot and cold water systems, including automated C.I.P. cleaning systems.
Can I use Eliminate in hard water?
Yes. Eliminate is formulated to work equally effectively in waters of all concentrations of hardness, and it avoids organic separation that can occur with some other sanitiser types in hard water.
What temperatures does Eliminate work in?
Eliminate is effective in cold, warm or hot water temperatures, making it flexible for different cleaning cycles and seasonal conditions.
What does Eliminate not contain?
Eliminate contains no iodine, chlorine or quaternary ammonia (QUATs), which means it avoids residues that can be left by those types of sanitisers. It has a non-residual formulation that leaves no buildup in the plant.
Where can I find safety and handling instructions?
Always read and follow the registered product label and Safety Data Sheet (SDS) before use. Contact TGRM on (07) 5482 1692 or visit us at 55 Tozer Street, Gympie, if you have specific questions about application, safety directions or product use.
Do you ship this product Australia-wide?
Yes, but freight on this product is quoted individually rather than calculated at checkout. Because of its size, weight or bulk we need to arrange delivery and confirm the cost with you before dispatch. It is also available for local delivery or Click and Collect from our Gympie store. Call us on (07) 5482 1692 or email tgrmorders@tomgrady.com.au and we will quote freight to your address.
Can I Click & Collect from Gympie?
Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.