DASCO ELIMINATE SANITIZER 20LT MULTI-TEMP (ACID) EL20
Eliminate is a sanitiser and acid detergent which is equally biocidal in waters of all concentrations of hardness.
Eliminate contains no iodine, chlorine or quaternary (QUATS).
It is suitable for re-use in acid sanitising systems and works in both hot and cold water
Features:
For sanitising after hot wash of milking plant and Vat
Removes milk-stone and water scale residues
Final Rinse:
Use Eliminate at 20 millilitres per 10 litres (All Temperatures)Inhibits bacterial growth
Effective in cold, warm or hot water temperatures
Ideal for automated C.I.P. cleaning systems
Can be used as a pre-milking sanitiser if required
Non residual formulation – leave to drain in plant
Avoids organic separation with hard water
Low foaming – can be used with all air injectors
Avoids residues which can exist with iodine, chlorine or quaternary ammonia based products
Directions Before Milking:
Pre-Rinse system thoroughly with clear water at 40 to 45°C. Do not recirculate.
Drain until clear.
Wash Cycle:
Use Acid / Alkali in hot water (85°C). At recommended rates
Final Rinse:
Use Eliminate at 20 millilitres per 10 litres (All Temperatures)
Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.
Download the Safety Data Sheet for this product:
Download SDS (PDF)Required for safe handling and storage. Keep on-site per WHS regulations.
Common Questions
Can I use Eliminate in both hot and cold water?
Yes, Eliminate works effectively in cold, warm or hot water temperatures, making it versatile for different cleaning schedules and system setups.
What does Eliminate remove from milking plant and vats?
Eliminate is designed to sanitise after the hot wash cycle and removes milk-stone and water scale residues from your milking plant and vats.
Is Eliminate suitable for automated C.I.P. cleaning systems?
Yes, Eliminate is ideal for automated C.I.P. (Clean In Place) cleaning systems. It's also low-foaming, so it works well with all air injectors.
What makes Eliminate different from other sanitisers?
Eliminate contains no iodine, chlorine or quaternary ammonia (QUATs), so it avoids residues that can build up with those products. It's equally effective in hard or soft water and is suitable for re-use in acid sanitising systems.
Where can I find the correct application rates?
Please refer to the registered product label for full directions and rates. If you have questions about using Eliminate for your specific setup, contact TGRM on (07) 5482 1692 or visit us at 55 Tozer St, Gympie.
Do you ship this product Australia-wide?
This is a dangerous good and cannot be sent by post or courier. It is available for local delivery around Gympie or for Click and Collect from our store at 55 Tozer St. Call us on (07) 5482 1692 to arrange.
Mainland Australia only — we cannot deliver this product to Tasmania. It is classified as environmentally hazardous (harmful to aquatic life), which means it cannot be carried by sea or air freight. Tasmania and other offshore destinations can only be reached by a sea or air leg, so we are unable to send it there. It travels by road freight to mainland addresses as normal. Call us on (07) 5482 1692 if you are unsure about your address.
Can you deliver this to Tasmania?
No. This product is environmentally hazardous (harmful to aquatic life) and cannot legally be carried on sea or air freight. Because every route to Tasmania involves a sea or air crossing, we can only deliver it within mainland Australia. If you are in Tasmania, please call us on (07) 5482 1692 and we will help you find an alternative product.
Can I Click & Collect from Gympie?
Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.