Ecolab Dairy Power Masidyne 20L

Ecolab Dairy Power Masidyne 20L

$277.45
In Stock Pre order Out of stock
2 in Stock
Add to Wishlist
Order by 12 noon Mon–Friand we pick and pack it the same day. Couriers usually collect the same or next business day.
Click & Collectallow 3 hours for us to have your order ready at 55 Tozer St, Gympie.
Local deliveryfor large items and large orders around Gympie — call (07) 5482 1692.
Ecolab Dairy Power Masidyne 20L at a glance
Active ingredient
Iodine 20 g/L
Withholding period
NIL — always confirm on the registered label

Masidyne is a Iodophor Teat Sanitiser, which is a medicated formula containing Lanolin 16g/L and Glycerol 46g/L, which can be used as a teat dip or spray, aiding in the control of Mastitis.

Directions For Use:

TO AVOID CONTAMINATION, REMOVE ALL MASIDYNE FROM TEATS BEFORE MILKING.

Ensure teats are CLEAN and DRY before milking to reduce organic and bacterial contaminations and iodine residue in milk.
If washing is required for heavily soiled udder or teats, ensure they are properly dried.
Thoroughly spray or dip all teats after every milking.
For best results a fresh solution should be made up daily using clean or boiled water.
Do not top up solutions made up on previous day.

Situation:

Teat Dip:

After each cow has been milked, immerse teats in the Masidyne solution.
Use a plastic or other non-metal type container for iodine solution.
Clean out dip cup as teat dip gets low. Do not just top up the dip.

Teat Spray:

After each cow has been milked, spray teats with Masidyne solution ensuring complete coverage of each teat and droplets form on teat ends.
Spray upwards from underneath the teats, not just from the side to side and ensure the whole surface of each teat is covered.

Emollient:

(Food grade glycerine) may be included to a maximum of 10%.

Critical Comments:

Do not overuse.
The use of stronger solutions is wasteful, unnecessary and may contaminate the milk.
The temperature of the water should not exceed 40ºC.

With Holding Period: NIL.

Protection of Wildlife, Fish Crustacea and Environment:

Do not contaminate streams, rivers or waterways with the chemical or used containers.

Active Constituents:
20g/L AVAILABLE IODINE

Active Ingredient: Iodine 20 g/L

Chemical Schedule: S6

APVMA Reg. No: 49122

NIL

Always read the current registered product label before use. Withholding periods must be observed before slaughter, milking, or egg collection. The label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

TO AVOID CONTAMINATION, REMOVE ALL MASIDYNE FROM TEATS BEFORE MILKING. Ensure teats are clean and dry before milking to reduce organic and bacterial contaminations and iodine residue in milk. If washing is required for heavily soiled udder or teats, ensure they are properly dried. Thoroughly spray or dip all teats after every milking. Rate: 1 L MASIDYNE to 3 L clean cool potable water. With emollient: dilute 3 parts of Masidyne in 8 parts of clean cool potable water and 1 part of emollient. Emollient (food grade glycerine) may be included to a maximum of 10%. For best results a fresh solution should be made up daily using clean or boiled water. Do not top up solutions made up on previous day. Teat dip: After each cow has been milked, immerse teats in the MASIDYNE solution. Use a plastic or other non-metal type container for iodine solution. Clean out dip cup as teat dip gets low. Teat spray: After each cow has been milked, spray teats with MASIDYNE solution ensuring complete coverage. Spray upwards from underneath the teats, not just from the side. Do not overuse. The use of stronger solutions is wasteful, unnecessary and may contaminate the milk. The temperature of the water should not exceed 40ºC. Withholding period: Nil. Always read the registered label before use (APVMA 49122).

Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Download Product Label (PDF)

View APVMA Registration

Always read the label and follow directions for use. The registered label is the legal document governing use of this product.

Download the Safety Data Sheet for this product:

Download SDS (PDF)

Required for safe handling and storage. Keep on-site per WHS regulations.

Common Questions

What is Masidyne used for?

Masidyne is an iodophor teat sanitiser, a medicated formula containing Lanolin 16 g/L and Glycerol 46 g/L, which can be used as a teat dip or spray, aiding in the control of Mastitis.

How do I mix it?

1 L Masidyne to 3 L clean cool potable water. With emollient, dilute 3 parts Masidyne in 8 parts clean cool potable water and 1 part emollient. Make up a fresh solution daily and do not top up solutions made up on the previous day. Water temperature should not exceed 40ºC.

How do I apply it?

Thoroughly spray or dip all teats after every milking. For a spray, ensure complete coverage and spray upwards from underneath the teats. Remove all Masidyne from teats before milking. Always read the registered label before use (APVMA 49122).

Is there a milk withholding period?

The label states the withholding period is Nil.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via road courier. It is too large or heavy for Australia Post. Call us on (07) 5482 1692 if you have any questions about delivery to your area.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.

SKU: 7302231
Categories: Dairy