Ecolab Dairy Power Defender Low Foam Acid Sanitiser 20L

Ecolab Dairy Power Defender Low Foam Acid Sanitiser 20L

$198.70
In Stock Pre order Out of stock
3 in Stock
Add to Wishlist
Buying in bulk? Get a quote
Order by 12 noon Mon–Friand we pick and pack it the same day. Couriers usually collect the same or next business day.
Click & Collectallow 3 hours for us to have your order ready at 55 Tozer St, Gympie.
Local deliveryfor large items and large orders around Gympie — call (07) 5482 1692.
Ecolab Dairy Power Defender Low Foam Acid Sanitiser 20L at a glance
Active ingredient
Alkyl Aryl Sulfonic Acid 96 g/L + Phosphoric Acid 502 g/L

Dairy Power Defender is a low foam high acid based sanitiser. It contains no iodine and can be used in hot or cold water.

Suitable for use in most automatic vat and line wash systems.

Active constituents:
502 g/L phosphoric acid
96 g/L alkylaryl sulphonic acid

POISON. KEEP OUT OF REACH OF CHILDREN. Corrosive. Attacks eyes, nose, throat and skin. Avoid contact with eyes, skin and clothing. Do not inhale vapour or spray mist.

Pack: 20 L.

Active Ingredient: Alkyl Aryl Sulfonic Acid 96 g/L + Phosphoric Acid 502 g/L

Chemical Schedule: S6

APVMA Reg. No: 49190

Milking plant: sanitise before or after milking when the plant has been washed and rinsed well. Use DEFENDER in hot or cold water for 2 to 3 minutes. Rate: 30 mL per 10 L. Allow a volume of 5 L of water per set of cups, or 10 L if reverse flow cleaning. Milk vats (auto wash): add sufficient sanitiser to the reservoir to suit water volume to be circulated. Rate: 30 mL per 10 L. A maximum pH of 4 in solution is desirable. When preparing product for use, wear cotton overalls buttoned to the neck and wrist and a washable hat, rubber apron, elbow-length neoprene gloves, face shield and chemical resistant footwear. Always read the registered label before use (APVMA 49190).

Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Download Product Label (PDF)

View APVMA Registration

Always read the label and follow directions for use. The registered label is the legal document governing use of this product.

Common Questions

What is Dairy Power Defender?

Defender is a low foam high acid based sanitiser. It contains no iodine and can be used in hot or cold water, and is suitable for use in most automatic vat and line wash systems.

How is it used in the milking plant?

Sanitise before or after milking when the plant has been washed and rinsed well. Use Defender in hot or cold water for 2 to 3 minutes.

What rate is used for milk vat auto wash?

Add sufficient sanitiser to the reservoir to suit the water volume to be circulated, at 30 mL per 10 L.

What safety precautions apply?

The product is corrosive and attacks eyes, nose, throat and skin. Avoid contact with eyes, skin and clothing and do not inhale vapour or spray mist. Read the safety directions on the label before opening or using.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via road courier. It is too large or heavy for Australia Post. Call us on (07) 5482 1692 if you have any questions about delivery to your area.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.