Ecolab Dairy Power Back Up Alkaline 20L Detergent

Ecolab Dairy Power Back Up Alkaline Detergent 20L

$210.65
In Stock Pre order Out of stock
1 in Stock
Add to Wishlist
Buying in bulk? Get a quote
Order by 12 noon Mon–Friand we pick and pack it the same day. Couriers usually collect the same or next business day.
Click & Collectallow 3 hours for us to have your order ready at 55 Tozer St, Gympie.
Local deliveryfor large items and large orders around Gympie — call (07) 5482 1692.
Ecolab Dairy Power Back Up Alkaline Detergent 20L at a glance
Active ingredient
644 g/L Sodium hydroxide, 6 g/L Non-ionic detergents

Dairy Power Back-Up is a low foam heavy duty alkaline cleaner.

It is a strong alkaline detergent designed to remove stubborn soils and is suitable for use in most automatic wash systems where liquids are preferred.

Active constituents: 644 g/L sodium hydroxide and 6 g/L non-ionic detergents.

POISON: the product is poisonous if swallowed and is alkaline. Avoid contact with skin, eyes and clothing.

Pack: 20 L.

Active Ingredient: 644 g/L Sodium hydroxide, 6 g/L Non-ionic detergents

Chemical Schedule: S6

APVMA Reg. No: 49183

Milking plants: after the initial rinse, add sufficient BACK-UP to the reservoir to suit the water volume to be circulated. The wash step should be 3 to 5 minutes at 65°C - 85°C. All milk contact surfaces should be rinsed and sanitised prior to next milking. Milk vats (auto wash): as above but with a maximum temperature of 75°C, ideally used after a warm rinse. Label rate: 30 mL per 10 L (soft water conditions) or 50 mL per 10 L (hard water conditions). Above 300 ppm is considered as hard water conditions. Ensure safety glasses are worn when filling reservoirs or making up cleaning solutions. Care should be taken if adding BACK-UP to a make up tank; use a small initial volume of warm water (< 50°C). A violent reaction may occur if added directly to boiling water. Always read the registered label before use (APVMA 49183).

Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Download Product Label (PDF)

View APVMA Registration

Always read the label and follow directions for use. The registered label is the legal document governing use of this product.

Download the Safety Data Sheet for this product:

Download SDS (PDF)

Required for safe handling and storage. Keep on-site per WHS regulations.

Common Questions

What is Dairy Power Back-Up?

It is a strong alkaline detergent designed to remove stubborn soils, suitable for use in most automatic wash systems where liquids are preferred.

How is it used in milking plants?

After the initial rinse, add sufficient BACK-UP to the reservoir to suit the water volume to be circulated. The wash step should be 3 to 5 minutes at 65°C - 85°C.

What rate does the label give?

The label rate is 30 mL per 10 L in soft water conditions or 50 mL per 10 L in hard water conditions (above 300 ppm is considered hard water). For milk vat auto wash, the maximum temperature is 75°C.

What safety precautions apply?

The product is poisonous if swallowed and is alkaline; avoid contact with skin, eyes and clothing. Wear safety glasses when filling reservoirs or making up cleaning solutions.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via road courier. Liquids, gels and pastes cannot be sent by Australia Post. Call us on (07) 5482 1692 if you have any questions about delivery to your area.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.