Ecolab Dairy Power Aquaklenz HV 20L

Ecolab Dairy Power Aquaklenz HV 20L

In Stock Pre order Out of stock
Out of Stock
Add to Wishlist
Order by 12 noon Mon–Friand we pick and pack it the same day. Couriers usually collect the same or next business day.
Click & Collectallow 3 hours for us to have your order ready at 55 Tozer St, Gympie.
Local deliveryfor large items and large orders around Gympie — call (07) 5482 1692.
Ecolab Dairy Power Aquaklenz HV 20L at a glance
Active ingredient
425 g/L Phosphoric acid, 453 g/L Sulfuric acid

Aquaklenz HV Concentrate is a low foam acid detergent sanitiser for the cleaning of high velocity dairy milking plants.

Aquaklenz HV Concentrate contains water conditioning agents to meet the demands of difficult water conditions, for example high iron and manganese water types. It is extremely low foaming in hot water.

Active constituents: 425 g/L phosphoric acid and 453 g/L sulfuric acid.

Rate
0.05–0.10% v/v. Milking plant: use in hot water (65°C–85°C) for 10 minutes.

POISON. Corrosive. Attacks eyes and skin. Will irritate the nose and throat.

Pack: 20 L.

Active Ingredient: 425 g/L Phosphoric acid, 453 g/L Sulfuric acid

Chemical Schedule: S6

APVMA Reg. No: 69804

Milking plant: Sanitise before or after milking when the plant has been washed and rinsed well. Use AQUAKLENZ HV CONCENTRATE in hot water (65°C–85°C) for 10 minutes. Open plant and allow to drain dry. Milk vats (autowash): Add sufficient sanitiser to the reservoir to suit water volume to be circulated. Open plant and allow to drain dry. Rate: 0.05–0.10% v/v. Allow a volume of 5 L of water per set of cups, or 10 L if reverse flow cleaning. Restrictions on sanitiser flow rate and air agitation will reduce possible foam problems. A maximum pH of 4 in solution is desirable. When preparing product for use wear cotton overalls buttoned to neck and wrist and a washable hat, rubber apron, elbow length neoprene gloves, face shield and chemical resistant footwear. Always read the registered label before use (APVMA 69804).

Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Download Product Label (PDF)

View APVMA Registration

Always read the label and follow directions for use. The registered label is the legal document governing use of this product.

Common Questions

What is Aquaklenz HV used for?

It is a low foaming acid detergent sanitiser for the cleaning of high velocity dairy milking plants, including milk vat autowash.

Is it suitable for difficult water?

It contains water conditioning agents to meet the demands of difficult water conditions, for example high iron and manganese water types.

How much do I use?

0.05–0.10% v/v. For milking plants, use in hot water (65°C–85°C) for 10 minutes. Allow a volume of 5 L of water per set of cups, or 10 L if reverse flow cleaning.

What safety precautions apply?

It is corrosive and attacks eyes and skin. When preparing product for use wear cotton overalls, a washable hat, rubber apron, elbow length neoprene gloves, face shield and chemical resistant footwear. Always read the registered label before use (APVMA 69804).

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via road courier. It is too large or heavy for Australia Post. Call us on (07) 5482 1692 if you have any questions about delivery to your area.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.

SKU: 7302070
Categories: Dairy
Tags: Dairy