Conquest In2 Spraying Oil 20L

Conquest Paraffinic Oil In2 20L Adjuvant

In Stock Pre order Out of stock
Out of Stock
Add to Wishlist
Order by 12 noon Mon–Friand we pick and pack it the same day. Couriers usually collect the same or next business day.
Click & Collectallow 3 hours for us to have your order ready at 55 Tozer St, Gympie.
Local deliveryfor large items and large orders around Gympie — call (07) 5482 1692.
Conquest Paraffinic Oil In2 20L Adjuvant at a glance
Active ingredient
582 g/L Paraffinic Oil, 120 g/L Nonyl Phenol Ethoxylate, 120 g/L Alcohol Ethoxylate
Controls
Adjuvant for herbicides, insecticides and defoliants: broadacre cropping including fallow (except sugarcane); sugarcane and cotton defoliation; spot and high volume sp...
Withholding period
Adhere to the withholding period(s) specified on the label of the comparison product(s) used. — always confirm on the registered label

Conquest In2 Spraying Oil is an adjuvated spraying oil to improve the spreading and wetting of herbicides, insecticides and defoliants on plant surfaces.

Active constituents:
582 g/L Paraffinic Oil
120 g/L Nonyl Phenol Ethoxylate
120 g/L Alcohol Ethoxylate

Situations on the label:

  • Broadacre cropping including fallow (except sugarcane)
  • Sugarcane and cotton defoliation
  • Spot and high volume spraying
  • Horticulture

Signal heading: CAUTION (Schedule 5). Always read the registered label before use (APVMA 82414).

Active Ingredient: 582 g/L Paraffinic Oil, 120 g/L Nonyl Phenol Ethoxylate, 120 g/L Alcohol Ethoxylate

Chemical Schedule: S5

APVMA Reg. No: 82414

Adhere to the withholding period(s) specified on the label of the comparison product(s) used.

Always read the current registered product label before use. Withholding periods must be observed before slaughter, milking, or egg collection. The label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Adjuvant for herbicides, insecticides and defoliants: broadacre cropping including fallow (except sugarcane); sugarcane and cotton defoliation; spot and high volume spraying; horticulture.
Broadacre cropping including fallow (except sugarcane): where specified use 500 mL In2/100 L water, applying a minimum of 250 mL of In2 per hectare. Sugarcane and cotton defoliation: where specified use 1 L In2/100 L water, applying a minimum of 500 mL of In2 per hectare. Spot and high volume spraying: where specified use 500 mL In2/100 L water, applying to the point of run-off. Horticulture: use 500 mL In2/100 L water, applying a minimum of 250 mL of In2 per hectare. Mixing: add water to the spray tank to 10 cm above the level of agitation and ensure the agitation device is working vigorously (there must be a minimum of 100 L of water in the tank before any pesticide is added). Finally add In2, and continue filling the tank to the required volume maintaining agitation at all times. Safety: will irritate the eyes; may irritate the skin. Avoid contact with eyes and skin. When opening the container and preparing spray, wear elbow-length PVC gloves and face shield or goggles. Always read the registered label before use (APVMA 82414).

Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Download Product Label (PDF)

View APVMA Registration

Always read the label and follow directions for use. The registered label is the legal document governing use of this product.

Download the Safety Data Sheet for this product:

Download SDS (PDF)

Required for safe handling and storage. Keep on-site per WHS regulations.

Common Questions

What is Conquest In2 Spraying Oil?

An adjuvated spraying oil to improve the spreading and wetting of herbicides, insecticides and defoliants on plant surfaces. It contains 582 g/L paraffinic oil, 120 g/L nonyl phenol ethoxylate and 120 g/L alcohol ethoxylate.

What rate is used?

Broadacre cropping including fallow (except sugarcane), where specified: 500 mL In2/100 L water, minimum 250 mL/ha. Sugarcane and cotton defoliation, where specified: 1 L/100 L water, minimum 500 mL/ha. Spot and high volume spraying, where specified: 500 mL/100 L water to the point of run-off. Horticulture: 500 mL/100 L water, minimum 250 mL/ha.

Is there a withholding period?

Adhere to the withholding period(s) specified on the label of the comparison product(s) used.

What safety gear is needed?

When opening the container and preparing spray, wear elbow-length PVC gloves and face shield or goggles. If poisoning occurs, contact a doctor or Poisons Information Centre, phone Australia 13 11 26.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via road courier. It is too large or heavy for Australia Post. Call us on (07) 5482 1692 if you have any questions about delivery to your area.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.