COCKY VALVE BODY ONLY ULTI-FLO 1"

$133.60
In Stock Pre order Out of stock
3 in Stock
Add to Wishlist
COCKY VALVE BODY ONLY ULTI-FLO 1" at a glance

Cocky Valve 25mm (1") Valve Body

Cocky Full Flow Float Valve Bodies are made from heavy duty stainless steel and can reliably operate in both very low (= 5 psi – 30kpa) or very high pressure (= 150psi – 1050 kpa) installs.

They can be fitted above or below the required water level, with some arm combinations even allowing the valve to be inverted and fitted up from the bottom face of the trough (as many feedlots require).

Features:

Grade 316 Stainless Steel construction

Full Flow in high or low pressure applications

Virtually indestructible by man or beast.

Packet includes:
Stainless Steel Body, 2 Split Pins, Push rod, washer and washer seat.

Install the Cocky valve body into your poly tank or trough inlet, ensuring the float arm moves freely without obstruction. Connect your water supply line to the inlet port and adjust the float to your desired water level by bending the arm slightly up or down. The valve will automatically shut off when the tank reaches the set level and open again as water is consumed. Check that your supply pressure matches the valve's pressure rating before commissioning. Tips: Always check your system's water pressure (most rural setups run 100-350kPa) against the valve's pressure rating to prevent leaks or premature wear. For dam-fed systems, install a strainer on the intake line to stop sediment fouling the valve seat. Keep the float arm clear of tank walls and debris so it operates smoothly.

Common Questions

What's included in this package?

The packet includes the stainless steel valve body, 2 split pins, a push rod, a washer and a washer seat. You'll need to source the arm and ball separately if you don't already have them.

What pressure can this valve handle?

The Cocky Valve Body is designed to work reliably in both very low pressure (5 psi / 30 kpa) and very high pressure (150 psi / 1050 kpa) installations, so it suits most farm water systems.

Can I fit it in different ways?

Yes. The valve body can be fitted above or below the required water level. Depending on which arm combination you use, it can even be inverted and fitted up from the bottom face of the trough — handy for feedlot setups.

What's it made from?

It's made from Grade 316 stainless steel, which is heavy duty and virtually indestructible by man or beast, so it'll stand up to rough farm use and harsh conditions.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via Australia Post or road courier. Select your preferred shipping method at checkout.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.

Ask a Question
SKU: 1127
Categories: Fittings & Valves Water Supplies
Tags: cat:water-fittings Water