L CLEAT 20MM X 30MM - SUITS 16MM PINS BOSAG PB20L

Slide the L cleat onto your 16mm pin so the cleat sits flush against the post or timber you're securing. Line up the hole in the cleat with your fencing wire or strap and drive the pin home with a hammer or mallet, making sure it goes in straight. The 20mm x 30mm size gives you good holding power for standard rural fencing applications without overdoing it. Tips: Don't hammer the pin in at an angle or you'll bend the cleat and waste time removing it — go straight and steady. Check that your pins are actually 16mm before you order these, as using the wrong size defeats the purpose and your wire will slip under load. Keep a few spares on hand because they're cheap and you'll inevitably lose one in the grass or bend it during installation.