CASPER 1KG TURF HERBICIDE AGRIBUSINESS 0GCASP1

In Stock Pre order Out of stock
Out of Stock
Add to Wishlist
CASPER 1KG TURF HERBICIDE AGRIBUSINESS 0GCASP1 at a glance
Active ingredient
500 g/kg dicamba + 50 g/kg prosulfuron
Controls
Casper Turf Herbicide provides selective control of a range of broadleaf weeds and certain grass weeds commonly found in turf situations. Typical target weeds for sulf...

Casper Turf Herbicide is a clever combination of two active ingredients (Dicamba 50% & Prosulfuron 5%) that together deliver more than either could in isolation.

Prosulfuron is new to the turf industry and has been combined with the trusted herbicide Dicamba to deliver highly effective control of many broadleaf weeds.

Casper Turf is for post-emergence selective control of certain broadleaf weeds in established turf.

Features:

Dual active ingredients, including Dicamba & Prosulfuron, a new active ingredient for turf.

A broad-spectrum selective post-emergence herbicide for turf that is highly effective in controlling broadleaf weeds.

A convenient water-dispersible granular formulation with economical rates and in a convenient 1 kg container making it easy to handle and mix.

Complete weed solution for turf in combination with Barricade Turf Herbicide and Monument Turf Herbicide.

Quick systemic action (xylem) with root, shoot and leaf uptake.

Highly effective in controlling many broadleaf weeds including Creeping Oxalis, Dandelion, Wireweed and many more.

Casper can be used on most warm and cool-season turf species:

Warm Season Turf Grasses:

Carpet Grass, Couch, Established Bahia Grass, Kikuyu, Paspalum, Queensland Blue Couch, Zoysia.

Cool Season Turf Grasses:

Bent Grass, Fescue, Perennial Ryegrass.

NOTE:
Do not apply to Buffalo Grass.

Targeted Weeds:

Bindi, Jo-jo, Bindi-eye, Lawn Burweed, Creeping Oxalis, Milk Thistle, Blackberry Nightshade, Curled Dock, Pennywort, Burr Medic, Dandelion, Subterranean Clover, Catsear, Fleabane, White Clover, Chickweed, Khaki Weed, Wireweed, Cotula, Lambs Tongue/ Plantain.

Casper as a post-emergent herbicide is taken up by leaves, shoots and roots of target weeds.

Application targeted towards delivering Casper to thoroughly cover the leaves and shoots is best.

Always apply with a non-ionic surfactant.

Casper can be washed off the leaves and into the soil to promote root uptake for complete systemic action.

Active Ingredients:

Prosulfuron @ 50g/kg
Dicamba @ 500g/kg

Active Ingredient: 500 g/kg dicamba + 50 g/kg prosulfuron

Chemical Schedule: S6

APVMA Reg. No: 63890

Also sold as: Glean, Logran, Harmony

Target Weeds

Casper Turf Herbicide provides selective control of a range of broadleaf weeds and certain grass weeds commonly found in turf situations. Typical target weeds for sulfonylurea-based turf herbicides include bindii (Soliva sessilis), capeweed (Arctotheca calendula), clover (Trifolium spp.), cudweed (Gnaphalium spp.), dandelion (Taraxacum officinale), dock (Rumex spp.), creeping oxalis (Oxalis corniculata), thistles (Cirsium and Carduus spp.), and plantain (Plantago spp.). Always check the registered label for the full and current list of controlled species and the turf types on which application is approved in your state.

Casper Turf Herbicide is a selective post-emergent herbicide designed for use on established turf areas including bowling greens, golf courses, sports fields, and ornamental lawns. Mix the required amount of product in water according to label rates and apply as a uniform foliar spray using a calibrated boom or knapsack sprayer. Ensure thorough and even coverage of target weeds without excessive runoff. Always refer to the product label for registered rates specific to your turf type and target weed species.

Apply when target weeds are actively growing and not under stress from drought, waterlogging, or extreme temperatures. Avoid application if rainfall is expected within the withholding period specified on the label, as washoff before uptake will reduce efficacy. Early morning applications are generally preferred to avoid high temperatures and wind that can affect spray quality and coverage.

Do not apply to newly seeded or recently turfed areas until turf is well established. Observe all re-entry intervals and withholding periods as stated on the product label. This product is an S6 Schedule 6 chemical — handle with care, wear appropriate PPE including chemical-resistant gloves, safety glasses, and protective clothing during mixing and application.

Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Tips for Best Results

  • Apply to actively growing weeds: Best results are achieved when weeds are young and actively growing. Avoid spraying during periods of drought stress, frost, or extreme heat as uptake and translocation will be reduced.
  • Calibrate your equipment: Accurate application is critical with sulfonylurea herbicides — even small overdoses can damage desirable turf species. Always calibrate your sprayer before use and apply at the correct volume per hectare as stated on the label.
  • Resistance management: Sulfonylurea herbicides (Group B / Group 2) are prone to resistance development with repeated use. Rotate to herbicides with a different mode of action where possible and avoid using the same product exclusively season after season.
  • Avoid drift and off-target movement: Use low-drift nozzles and spray only in calm conditions (wind speeds below 15 km/h). Sulfonylurea residues can damage nearby ornamental plants, gardens, and sensitive crops — maintain appropriate buffer distances from non-target areas.
  • Storage and safety: Store in a cool, dry, locked location away from children, pets, and foodstuffs as required for an S6 chemical. Dispose of empty containers according to label instructions and local council requirements — triple rinse and puncture before disposal.

Download Product Label (PDF)

View APVMA Registration

Always read the label and follow directions for use. The registered label is the legal document governing use of this product.

Common Questions

What turf types can I use Casper on?

Casper is suitable for most warm and cool-season turf grasses, including Couch, Kikuyu, Paspalum, Zoysia, Perennial Ryegrass, Fescue and Bent Grass. However, do not apply to Buffalo Grass. Always check the product label to confirm your turf type is listed before use.

What weeds does Casper control?

Casper is a post-emergence selective herbicide that controls a broad range of broadleaf weeds in turf, including Creeping Oxalis, Dandelion, Wireweed, Bindi, White Clover, Chickweed, Catsear, Plantain, Fleabane and many others. For a complete list of targeted weeds, refer to the product label.

What are the active ingredients in Casper?

Casper contains two active ingredients: Dicamba and Prosulfuron. This dual-active combination is designed to work together for more effective broadleaf weed control than either ingredient could achieve alone. Prosulfuron is relatively new to the turf industry.

How should I apply Casper?

Casper is a water-dispersible granular formulation applied as a post-emergence herbicide. Application should target thorough coverage of weed leaves and shoots. Always apply with a non-ionic surfactant as directed on the label. For detailed application instructions, mixing rates and safety directions, consult the registered product label or contact TGRM on (07) 5482 1692.

Where can I find the safety information and label?

As a regulated agricultural chemical, Casper is supplied with a registered product label and Safety Data Sheet (SDS). Always read and follow all label directions before use, including application rates, withholding periods and safety precautions. If you need help locating these documents, contact TGRM at (07) 5482 1692 or visit 55 Tozer St, Gympie, or speak with your local agronomist or veterinarian.

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via Australia Post or road courier. Select your preferred shipping method at checkout.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.