CAMLOCK POLY MALE ADAPTOR X FEMALE BSP TYPE A 40MM PHILMAC A150-PP

Insert the barbed end of the male adaptor into the poly pipe, ensuring the pipe is pushed firmly onto the barb until it seats fully against the fitting body. Secure the connection with two stainless steel hose clamps positioned close to the barb, tightening evenly to create a watertight seal without over-tightening. The female BSP threaded end accepts standard BSP-threaded fittings (taps, valves, or couplings). Ensure the poly pipe is clean and free from debris before inserting into the barb. Tips: Always use stainless steel clamps on barb connections as galvanised clamps will corrode in wet environments and fail prematurely. Pre-warm the poly pipe in warm water on cold days to make it more pliable and easier to push onto the barb. Check that your system pressure (typically 400-600kPa for gravity-fed rural systems) doesn't exceed the 800kPa rating of standard green-stripe poly pipe.