CAMLOCK POLY MALE ADAPTOR X FEMALE BSP TYPE A 25MM PHILMAC A100-PP

Insert the barb end firmly into the poly pipe until fully seated, then secure with two stainless steel hose clamps positioned either side of the barb ridges and tighten evenly. Screw the female BSP thread onto your threaded male connector (tap, valve, or pump outlet) by hand first, then use two spanners to tighten — one holding the fitting body and one turning the BSP connection. Ensure the poly pipe is clean and cut square before insertion to prevent leaks. For permanent installations, consider solvent weld fittings instead of barb connections. Tips: Always use stainless steel clamps on barb fittings in rural water systems to prevent corrosion and clamp failure. Test your connections under pressure before relying on them for permanent farm water supply. Store poly fittings away from direct UV sunlight when not installed, as exposure degrades the plastic over time.