CAMLOCK ALUMINIUM FEMALE ADAPTOR X MALE BSP TYPE B 50MM PHILMAC

Ensure the male BSP thread is clean and wrap with PTFE tape (3-4 wraps) before screwing into the female adapter to create a watertight seal. Tighten firmly by hand, then use a spanner on the adapter body (not the thread) for final tightening—do not over-tighten as this can crack the aluminium. Connect your 50mm rural poly pipe to the camlock coupling end, securing with a stainless steel clamp positioned just below the barb. Test the connection under system pressure to confirm no leaks before burying or covering the line. Tips: Always use stainless steel clamps with barb fittings in rural applications to prevent rust and corrosion in Queensland's moisture-rich environment. This adapter is ideal for connecting your poly pipe system to threaded outlets (pumps, tanks, gates) while maintaining the flexibility and low cost of poly pipework. Check your system pressure rating before installation—rural poly (green stripe) is typically rated to 800kPa, so confirm your pump or gravity-fed system operates within this limit.