CAMLOCK ALUMINIUM FEMALE ADAPTOR X MALE BSP TYPE B 40MM PHILMAC

Ensure the male BSP thread is clean and dry before connection. Wrap the male thread with PTFE tape (3-4 layers) in a clockwise direction to create a watertight seal. Screw the camlock adaptor firmly onto the male BSP thread by hand, then use an adjustable spanner to tighten by approximately one full turn — do not over-tighten as this may damage the fitting. Connect your 40mm poly pipe to the camlock female adaptor using an appropriate stainless steel clamp, ensuring the barb is fully inserted into the pipe. Tips: Always use stainless steel clamps with barb fittings to prevent rust and corrosion in rural water systems. Test your connection under pressure before burying or permanently installing the line to confirm the seal is watertight. For easier future disconnection, apply a light coat of grease to the camlock connection point.