Boracol Timber Insecticide & Fungicide 20L & 5L

$405.85
In Stock Pre order Out of stock

Pack Size: 20LT

20LT
5L
2 in Stock
Add to Wishlist
Buying in bulk? Get a quote
Order by 12 noon Mon–Friand we pick and pack it the same day. Couriers usually collect the same or next business day.
Click & Collectallow 3 hours for us to have your order ready at 55 Tozer St, Gympie.
Local deliveryfor large items and large orders around Gympie — call (07) 5482 1692.
Boracol Timber Insecticide & Fungicide 20L & 5L at a glance
Active ingredient
52 g/L Boron (present as disodium octaborate tetrahydrate), 12 g/L Benzalkonium chloride

Boracol 200RH Fungicide (APVMA 30711). For industrial/domestic use as a remedial treatment of timber against decay and insects.

Active constituents: 52 g/L boron present as disodium octaborate tetrahydrate and 12 g/L benzalkonium chloride.

Label uses include:

  • Prevention of mould, algae and fungi for timber, masonry, brickwork and concrete
  • Remedial/insecticide treatment of timber and concrete
  • Protection of internal Radiata Pine framing timbers from rot due to moisture ingress caused when the timber is stored, transported or used as part of a structure which is to be protected from weather (brown rot and wet rot)

Supplied ready for use for in-situ, remedial preventative treatment as per the label application table. Can be applied by brush, roller, dipping, spraying or by vacuum/pressure treatment plant.

Restraints: DO NOT USE on surfaces which come into direct contact with foodstuffs, on roofs for collection of potable water, or on surfaces which come into direct contact with the ground. DO NOT move treated timber from drip pads until timber surface is drip free.

Always read the registered label before use (APVMA 30711).

Active Ingredient: 52 g/L Boron (present as disodium octaborate tetrahydrate), 12 g/L Benzalkonium chloride

Chemical Schedule: S5

APVMA Reg. No: 30711

BORACOL 200RH is supplied ready for use for in-situ, remedial preventative treatment as per the application table. Recommended rate/m² for a depth or thickness of 25 mm, 50 mm and 100 mm: PREVENTION of mould, algae and fungi for Timber, Masonry, Brickwork and concrete 250 mL, 500 mL and 1 L; REMEDIAL/INSECTICIDE Timber and concrete 500 mL, 1 L and 2 L. Protection of internal Radiata Pine Framing Timbers from rot due to moisture ingress caused when the timber is stored, transported or used as part of a structure which is to be protected from weather (Brown rot (Oligoporus placenta), Wet rot (Coniophora puteana)): dip/spray/brush or Vacuum/Pressure Treatment Plant, 430 g as BAE (Boric Acid Equivalent) per 100 kg of wood. To achieve a retention rate of 430 g as BAE per 100 kg of wood, Boracol 200RH should be applied without dilution as per the rates stated in the APPLICATION TABLE. BORACOL 200RH can be applied by brush, roller, dipping, spraying or by Vacuum/Pressure Treatment Plant. If the surface to be treated is very dry the penetration of BORACOL 200RH will be enhanced if the surface is sprayed with water prior to treatment; timber for vacuum/pressure treatment should NOT be sprayed with water prior to treatment. When using high rates (remedial/insecticide) it may be necessary to apply via two coatings with two to three hours interval. Surfaces exposed to weather/rain are recommended to be sealed after application of BORACOL 200RH with a water repellent, paint or other suitable sealant. DO NOT USE on surfaces which come into direct contact with foodstuffs. DO NOT USE on roofs for collection of potable water. DO NOT USE on surfaces which come into direct contact with the ground. DO NOT move treated timber from drip pads until timber surface is drip free. Always read the registered label before use (APVMA 30711).

Always read the current registered product label before use. Dose rates and withholding periods on this page are provided as a guide only. The registered label supplied with the product is the legal document and takes precedence. If in doubt, contact TGRM on (07) 5482 1692 or the manufacturer directly.

Download Product Label (PDF)

View APVMA Registration

Always read the label and follow directions for use. The registered label is the legal document governing use of this product.

Download the Safety Data Sheet for this product:

Download SDS (PDF)

Required for safe handling and storage. Keep on-site per WHS regulations.

Common Questions

Do you ship this product Australia-wide?

Yes, this product ships Australia-wide via road courier. It is too large or heavy for Australia Post. Call us on (07) 5482 1692 if you have any questions about delivery to your area.

Can I Click & Collect from Gympie?

Yes — Click & Collect is available from our store at 55 Tozer St, Gympie. Open Mon–Fri 8am–5pm and Sat 8am–12pm. Click & Collect is FREE on orders of $175 or more, or a flat $10 on orders under $175. Select Click & Collect at checkout and we will have your order ready.

SKU: CBORC