GATE FITTING WELD ON 20MM HINGE SET ROTECH FG20

Looking for a simple, yet strong and reliable hinge.

These weld on hinges are perfect for any steel gate.

Whether you plan to use them for your farm gate, trailer or dog box, these zinc plated hinges are cheap and economical.

The 20mm option is an excellent all-rounder.

The standard 20mm is wider so it sits on the RHS better.

The larger option is great if you want to wrap it around the pipe a little bit further.

Installing your gate so you can pull it off, is pretty simple:

Weld the sockets onto the gate itself.
Measure the distance between the sockets.
Weld the pins onto your post, one at the bottom, and one at the top.
Make sure you have left plenty of room at the bottom so the gate clears the ground.
Double check the pins are the same distance apart as your sockets.
The pins should be pointing up.
Lift your gate up and drop it on the pins.

If you want to make sure your gate is secure and cant be removed:

Weld your bottom pin onto your post (pin pointing up) and your bottom socket on your gate.
Sit your gate on the bottom pin.
Weld your top socket to your gate.
Drop your pin into the top socket. (Pin is pointing down)
Weld the pin to the post.